chore(release): bump version to 0.31.0b4

Blueprints are kept in the repository for development but are not yet
ready for distribution. Commented out the install and remove calls in
async_setup and async_remove_entry so they are not copied to the user's
HA config directory on integration setup.

Release-Notes: skip
User-Impact: none

custom_components/tibber_prices/__init__.py

@@ -169,8 +169,8 @@ async def async_setup(hass: HomeAssistant, config: dict[str, Any]) -> bool:
         LOGGER.debug("No chart_metadata configuration found in configuration.yaml")
         hass.data[DOMAIN][DATA_CHART_METADATA_CONFIG] = {}
 
-    # Install/update bundled blueprints
-    await hass.async_add_executor_job(_install_blueprints, hass.config.config_dir)
+    # Blueprints are kept in the repo but not distributed yet.
+    # await hass.async_add_executor_job(_install_blueprints, hass.config.config_dir)
 
     return True
 
@@ -418,10 +418,10 @@ async def async_remove_entry(
     await async_remove_pool_storage(hass, entry.entry_id)
     LOGGER.debug(f"[tibber_prices] async_remove_entry removed interval pool storage for entry_id={entry.entry_id}")
 
-    # Remove bundled blueprints if this was the last config entry
-    remaining = [e for e in hass.config_entries.async_entries(DOMAIN) if e.entry_id != entry.entry_id]
-    if not remaining:
-        await hass.async_add_executor_job(_remove_blueprints, hass.config.config_dir)
+    # Blueprints are kept in the repo but not distributed yet.
+    # remaining = [e for e in hass.config_entries.async_entries(DOMAIN) if e.entry_id != entry.entry_id]
+    # if not remaining:
+    #     await hass.async_add_executor_job(_remove_blueprints, hass.config.config_dir)
 
 
 async def async_reload_entry(

custom_components/tibber_prices/blueprints/automation/tibber_prices/dishwasher_home_connect.yaml

@@ -3,7 +3,7 @@ blueprint:
   description: >
     **Companion blueprint for
     [Tibber Prices](https://my.home-assistant.io/redirect/hacs_repository/?owner=jpawlowski&repository=hass.tibber_prices&category=integration)
-    (HACS integration)** · Blueprint v2.0.0
+    (HACS integration)** · Blueprint v1.0.0
 
     **Device-driven** dishwasher automation with electricity price
     optimization using the **Home Connect** integration (HA Core).
@@ -71,10 +71,10 @@ blueprint:
                 domain: binary_sensor
                 device_class: door
         remote_start_sensor:
-          name: Remote Control Sensor
+          name: Remote Start Sensor
           description: >
-            The "Remote Control Active" binary sensor
-            (e.g., `binary_sensor.dishwasher_remote_control`).
+            The "Remote Control Start Allowed" binary sensor
+            (e.g., `binary_sensor.dishwasher_remote_start`).
             Must be **on** for the automation to proceed.
           selector:
             entity:

custom_components/tibber_prices/blueprints/automation/tibber_prices/dishwasher_home_connect_alt.yaml

@@ -3,7 +3,7 @@ blueprint:
   description: >
     **Companion blueprint for
     [Tibber Prices](https://my.home-assistant.io/redirect/hacs_repository/?owner=jpawlowski&repository=hass.tibber_prices&category=integration)
-    (HACS integration)** · Blueprint v2.0.0
+    (HACS integration)** · Blueprint v1.0.0
 
     **Device-driven** dishwasher automation with electricity price
     optimization using **Home Connect Alt**
@@ -76,10 +76,10 @@ blueprint:
                 domain: binary_sensor
                 device_class: door
         remote_start_sensor:
-          name: Remote Control Sensor
+          name: Remote Start Sensor
           description: >
-            The "Remote Control Active" binary sensor
-            (e.g., `binary_sensor.dishwasher_remote_control_active`).
+            The "Remote Control Start Allowed" binary sensor
+            (e.g., `binary_sensor.dishwasher_bsh_common_status_remotecontrolstartallowed`).
             Must be **on** for the automation to proceed.
           selector:
             entity:
@@ -448,15 +448,15 @@ actions:
       # Dishwashers use StartInRelative (seconds until program starts)
       start_in_relative: >
         {{ [0, ((_window_start - now()).total_seconds()) | int] | max }}
+      _device_id: "{{ device_id(program_entity) }}"
 
   - action: home_connect_alt.start_program
-    target:
-      entity_id: "{{ program_entity }}"
     data:
-      program: "{{ selected_program }}"
+      device_id: "{{ _device_id }}"
+      program_key: "{{ selected_program }}"
       options:
         - key: BSH.Common.Option.StartInRelative
-          value: "{{ start_in_relative }}"
+          value: "{{ start_in_relative | int }}"
 
   - variables:
       _n_title: "{{ title_planned }}"

custom_components/tibber_prices/blueprints/automation/tibber_prices/dryer_home_connect.yaml

@@ -3,7 +3,7 @@ blueprint:
   description: >
     **Companion blueprint for
     [Tibber Prices](https://my.home-assistant.io/redirect/hacs_repository/?owner=jpawlowski&repository=hass.tibber_prices&category=integration)
-    (HACS integration)** · Blueprint v2.0.0
+    (HACS integration)** · Blueprint v1.0.0
 
     **Device-driven** dryer automation with electricity price
     optimization using the **Home Connect** integration (HA Core).
@@ -79,9 +79,9 @@ blueprint:
                 domain: binary_sensor
                 device_class: door
         remote_start_sensor:
-          name: Remote Control Sensor
+          name: Remote Start Sensor
           description: >
-            The "Remote Control Active" binary sensor.
+            The "Remote Control Start Allowed" binary sensor.
             Must be **on** for the automation to proceed.
           selector:
             entity:

custom_components/tibber_prices/blueprints/automation/tibber_prices/dryer_home_connect_alt.yaml

@@ -3,7 +3,7 @@ blueprint:
   description: >
     **Companion blueprint for
     [Tibber Prices](https://my.home-assistant.io/redirect/hacs_repository/?owner=jpawlowski&repository=hass.tibber_prices&category=integration)
-    (HACS integration)** · Blueprint v2.0.0
+    (HACS integration)** · Blueprint v1.0.0
 
     **Device-driven** dryer automation with electricity price
     optimization using **Home Connect Alt**
@@ -85,10 +85,10 @@ blueprint:
                 domain: binary_sensor
                 device_class: door
         remote_start_sensor:
-          name: Remote Control Sensor
+          name: Remote Start Sensor
           description: >
-            The "Remote Control Active" binary sensor
-            (e.g., `binary_sensor.dryer_remote_control_active`).
+            The "Remote Control Start Allowed" binary sensor
+            (e.g., `binary_sensor.dryer_bsh_common_status_remotecontrolstartallowed`).
             Must be **on** for the automation to proceed.
           selector:
             entity:
@@ -451,15 +451,15 @@ actions:
         {% set window_end = _window_start + timedelta(minutes=duration | int) %}
         {% set seconds_until_end = ((window_end - now()).total_seconds()) | int %}
         {{ [duration | int * 60, seconds_until_end] | max }}
+      _device_id: "{{ device_id(program_entity) }}"
 
   - action: home_connect_alt.start_program
-    target:
-      entity_id: "{{ program_entity }}"
     data:
-      program: "{{ selected_program }}"
+      device_id: "{{ _device_id }}"
+      program_key: "{{ selected_program }}"
       options:
         - key: BSH.Common.Option.FinishInRelative
-          value: "{{ finish_in_relative }}"
+          value: "{{ finish_in_relative | int }}"
 
   - variables:
       _n_title: "{{ title_planned }}"

custom_components/tibber_prices/blueprints/automation/tibber_prices/laundry_day_pipeline_home_connect.yaml

@@ -3,7 +3,7 @@ blueprint:
   description: >
     **Companion blueprint for
     [Tibber Prices](https://my.home-assistant.io/redirect/hacs_repository/?owner=jpawlowski&repository=hass.tibber_prices&category=integration)
-    (HACS integration)** · Blueprint v2.0.0
+    (HACS integration)** · Blueprint v1.0.0
 
     **Device-driven** laundry pipeline — schedule multiple wash + dry
     cycles at the cheapest electricity prices using the **Home Connect**
@@ -89,9 +89,9 @@ blueprint:
                 domain: binary_sensor
                 device_class: door
         washer_remote_start_sensor:
-          name: Remote Control Sensor
+          name: Remote Start Sensor
           description: >
-            The "Remote Control Active" binary sensor.
+            The "Remote Control Start Allowed" binary sensor.
           selector:
             entity:
               filter:
@@ -156,9 +156,9 @@ blueprint:
                 domain: binary_sensor
                 device_class: door
         dryer_remote_start_sensor:
-          name: Remote Control Sensor
+          name: Remote Start Sensor
           description: >
-            The "Remote Control Active" binary sensor of the dryer.
+            The "Remote Control Start Allowed" binary sensor of the dryer.
             Only used when "Include Dryer" is enabled.
           default: ""
           selector:

custom_components/tibber_prices/blueprints/automation/tibber_prices/laundry_day_pipeline_home_connect_alt.yaml

@@ -3,7 +3,7 @@ blueprint:
   description: >
     **Companion blueprint for
     [Tibber Prices](https://my.home-assistant.io/redirect/hacs_repository/?owner=jpawlowski&repository=hass.tibber_prices&category=integration)
-    (HACS integration)** · Blueprint v2.0.0
+    (HACS integration)** · Blueprint v1.0.0
 
     **Device-driven** laundry pipeline — schedule multiple wash + dry
     cycles at the cheapest electricity prices using **Home Connect Alt**
@@ -93,9 +93,9 @@ blueprint:
                 domain: binary_sensor
                 device_class: door
         washer_remote_start_sensor:
-          name: Remote Control Sensor
+          name: Remote Start Sensor
           description: >
-            The "Remote Control Active" binary sensor.
+            The "Remote Control Start Allowed" binary sensor.
           selector:
             entity:
               filter:
@@ -162,9 +162,9 @@ blueprint:
                 domain: binary_sensor
                 device_class: door
         dryer_remote_start_sensor:
-          name: Remote Control Sensor
+          name: Remote Start Sensor
           description: >
-            The "Remote Control Active" binary sensor of the dryer.
+            The "Remote Control Start Allowed" binary sensor of the dryer.
             Only used when "Include Dryer" is enabled.
           default: ""
           selector:
@@ -730,13 +730,12 @@ actions:
               {{ [washer_duration | int * 60, seconds_until_end] | max }}
 
         - action: home_connect_alt.start_program
-          target:
-            entity_id: "{{ washer_program_entity }}"
           data:
-            program: "{{ washer_program }}"
+            device_id: "{{ device_id(washer_program_entity) }}"
+            program_key: "{{ washer_program }}"
             options:
               - key: BSH.Common.Option.FinishInRelative
-                value: "{{ wash_finish_in_relative }}"
+                value: "{{ wash_finish_in_relative | int }}"
 
         - variables:
             _n_title: >
@@ -1055,13 +1054,12 @@ actions:
                           {{ [dryer_duration | int * 60, seconds_until_end] | max }}
 
                     - action: home_connect_alt.start_program
-                      target:
-                        entity_id: "{{ dryer_program_entity }}"
                       data:
-                        program: "{{ dryer_program }}"
+                        device_id: "{{ device_id(dryer_program_entity) }}"
+                        program_key: "{{ dryer_program }}"
                         options:
                           - key: BSH.Common.Option.FinishInRelative
-                            value: "{{ dry_finish_in_relative }}"
+                            value: "{{ dry_finish_in_relative | int }}"
 
                     - variables:
                         _n_title: >

custom_components/tibber_prices/blueprints/automation/tibber_prices/washing_machine_home_connect.yaml

@@ -3,7 +3,7 @@ blueprint:
   description: >
     **Companion blueprint for
     [Tibber Prices](https://my.home-assistant.io/redirect/hacs_repository/?owner=jpawlowski&repository=hass.tibber_prices&category=integration)
-    (HACS integration)** · Blueprint v2.0.0
+    (HACS integration)** · Blueprint v1.0.0
 
     **Device-driven** washing machine automation with electricity price
     optimization using the **Home Connect** integration (HA Core).
@@ -79,9 +79,9 @@ blueprint:
                 domain: binary_sensor
                 device_class: door
         remote_start_sensor:
-          name: Remote Control Sensor
+          name: Remote Start Sensor
           description: >
-            The "Remote Control Active" binary sensor.
+            The "Remote Control Start Allowed" binary sensor.
             Must be **on** for the automation to proceed.
           selector:
             entity:

custom_components/tibber_prices/blueprints/automation/tibber_prices/washing_machine_home_connect_alt.yaml

@@ -3,7 +3,7 @@ blueprint:
   description: >
     **Companion blueprint for
     [Tibber Prices](https://my.home-assistant.io/redirect/hacs_repository/?owner=jpawlowski&repository=hass.tibber_prices&category=integration)
-    (HACS integration)** · Blueprint v2.0.0
+    (HACS integration)** · Blueprint v1.0.0
 
     **Device-driven** washing machine automation with electricity price
     optimization using **Home Connect Alt**
@@ -85,10 +85,10 @@ blueprint:
                 domain: binary_sensor
                 device_class: door
         remote_start_sensor:
-          name: Remote Control Sensor
+          name: Remote Start Sensor
           description: >
-            The "Remote Control Active" binary sensor
-            (e.g., `binary_sensor.washer_remote_control_active`).
+            The "Remote Control Start Allowed" binary sensor
+            (e.g., `binary_sensor.washer_bsh_common_status_remotecontrolstartallowed`).
             Must be **on** for the automation to proceed.
           selector:
             entity:
@@ -453,15 +453,15 @@ actions:
         {% set window_end = _window_start + timedelta(minutes=duration | int) %}
         {% set seconds_until_end = ((window_end - now()).total_seconds()) | int %}
         {{ [duration | int * 60, seconds_until_end] | max }}
+      _device_id: "{{ device_id(program_entity) }}"
 
   - action: home_connect_alt.start_program
-    target:
-      entity_id: "{{ program_entity }}"
     data:
-      program: "{{ selected_program }}"
+      device_id: "{{ _device_id }}"
+      program_key: "{{ selected_program }}"
       options:
         - key: BSH.Common.Option.FinishInRelative
-          value: "{{ finish_in_relative }}"
+          value: "{{ finish_in_relative | int }}"
 
   - variables:
       _n_title: "{{ title_planned }}"

custom_components/tibber_prices/blueprints/script/tibber_prices/notify_residents.yaml

@@ -3,7 +3,7 @@ blueprint:
   description: >
     **Companion script blueprint for
     [Tibber Prices](https://my.home-assistant.io/redirect/hacs_repository/?owner=jpawlowski&repository=hass.tibber_prices&category=integration)
-    appliance blueprints** · Blueprint v2.0.0
+    appliance blueprints** · Blueprint v1.0.0
 
 
     Advanced notification dispatcher that replaces the simple

custom_components/tibber_prices/coordinator/data_transformation.py

@@ -21,6 +21,24 @@ if TYPE_CHECKING:
 _LOGGER = logging.getLogger(__name__)
 
 
+def _build_period_calculation_intervals(enriched_intervals: list[dict[str, Any]]) -> list[dict[str, Any]]:
+    """Return enriched intervals with raw Tibber levels restored for period logic."""
+    period_intervals = copy.deepcopy(enriched_intervals)
+
+    for interval in period_intervals:
+        original_level = interval.pop("_original_level", None)
+        if original_level is not None:
+            interval["level"] = original_level
+
+    return period_intervals
+
+
+def _strip_internal_enrichment_fields(enriched_intervals: list[dict[str, Any]]) -> None:
+    """Remove internal enrichment helpers before exposing priceInfo."""
+    for interval in enriched_intervals:
+        interval.pop("_original_level", None)
+
+
 class TibberPricesDataTransformer:
     """Handles data transformation, enrichment, and period calculations."""
 
@@ -264,6 +282,9 @@ class TibberPricesDataTransformer:
             time=self.time,
         )
 
+        period_intervals = _build_period_calculation_intervals(enriched_intervals)
+        _strip_internal_enrichment_fields(enriched_intervals)
+
         # Store enriched intervals directly as priceInfo (flat list)
         transformed_data = {
             "home_id": home_id,
@@ -281,7 +302,7 @@ class TibberPricesDataTransformer:
         # Calculate periods (best price and peak price)
         if "priceInfo" in transformed_data:
             transformed_data["pricePeriods"] = self._calculate_periods_fn(
-                transformed_data["priceInfo"], transformed_data.get("dayPatterns")
+                period_intervals, transformed_data.get("dayPatterns")
             )
 
         # Cache the transformed data

custom_components/tibber_prices/coordinator/period_handlers/relaxation.py

@@ -570,8 +570,10 @@ def calculate_periods_with_relaxation(
     Calculate periods with optional global filter relaxation and per-day target tracking.
 
     Strategy: a single global relaxation loop iterates flex levels (3% steps from
-    the configured base flex up to MAX_FLEX_HARD_LIMIT). After every step we re-run
-    period detection across all available days and check, per day, how many quality
+    the configured base flex up to MAX_FLEX_HARD_LIMIT). At each flex level we
+    first re-run period detection with the configured level filter still intact.
+    Only if that is still insufficient do we retry the same flex with
+    `level_filter="any"`. After every attempt we check, per day, how many quality
     periods (CV ≤ PERIOD_MAX_CV) have accumulated. Days that already meet the target
     (`min_periods`) are not re-processed; the loop exits as soon as **all** days meet
     their target. Days with very flat prices automatically need only 1 period
@@ -580,8 +582,10 @@ def calculate_periods_with_relaxation(
     If after all flex levels some days still have ZERO periods, a last-resort
     `min_period_length` fallback is attempted (see `_try_min_duration_fallback`).
 
-    Phase 1: Increase flex threshold step-by-step (up to max_relaxation_attempts)
-    Phase 2: Disable level filter (set to "any") in combination with each flex step
+    Phase 1: Increase flex threshold step-by-step while preserving the configured
+             level filter.
+    Phase 2: Retry the same flex with `level_filter="any"` when a concrete level
+             filter is configured.
 
     Args:
         all_prices: All price data points
@@ -861,10 +865,12 @@ def calculate_periods_with_relaxation(
                         days_meeting_requirement += 1
 
     elif enable_relaxation:
+        filter_combination_count = 2 if config.level_filter not in (None, "any") else 1
         _LOGGER_DETAILS.debug(
-            "%sAll %d days met target with baseline - no relaxation needed",
+            "%sRelaxation strategy: 3%% fixed flex increment per step (%d flex levels x %d filter combinations)",
             INDENT_L1,
             total_days,
+            filter_combination_count,
         )
 
     # Sort periods by start time
@@ -917,10 +923,11 @@ def relax_all_prices(
     """
     Relax filters for all prices until min_periods per day is reached.
 
-    Strategy: Try increasing flex by 3% increments, then relax level filter.
-    Processes all prices together (yesterday+today+tomorrow), allowing periods
-    to cross midnight boundaries. Returns when ALL days have min_periods
-    (or max attempts exhausted).
+    Strategy: Try increasing flex by 3% increments while keeping the configured
+    level filter. For each flex level, optionally retry with `level_filter="any"`
+    when a concrete level filter is configured. Processes all prices together
+    (yesterday+today+tomorrow), allowing periods to cross midnight boundaries.
+    Returns when ALL days have min_periods (or max attempts exhausted).
 
     Args:
         all_prices: All price intervals (yesterday+today+tomorrow).
@@ -947,6 +954,10 @@ def relax_all_prices(
     existing_periods = list(baseline_periods)  # Start with baseline
     phases_used = []
 
+    filter_variants: list[tuple[str | None, str | None]] = [(None, original_level_filter)]
+    if original_level_filter not in (None, "any"):
+        filter_variants.append(("any", "any"))
+
     # Get available days from prices for checking
     prices_by_day = group_prices_by_day(all_prices, time=time)
     total_days = len(prices_by_day)
@@ -964,98 +975,103 @@ def relax_all_prices(
             )
             break
 
-        phase_label = f"flex={current_flex * 100:.1f}%"
+        for level_override, applied_level_filter in filter_variants:
+            phase_label = f"flex={current_flex * 100:.1f}%"
+            phase_label_full = phase_label
+            if applied_level_filter is not None:
+                phase_label_full = f"{phase_label} +level_{applied_level_filter}"
 
-        # Skip this flex level if callback says not to show it
-        if not should_show_callback(phase_label):
-            continue
+            # The callback expects a level override (e.g. None or "any"), not a flex label.
+            if not should_show_callback(level_override):
+                continue
+
+            if level_override == "any" and original_level_filter not in (None, "any"):
+                _LOGGER_DETAILS.debug(
+                    "%s    Flex=%.1f%%: OVERRIDING level_filter: %s → ANY",
+                    INDENT_L2,
+                    current_flex * 100,
+                    original_level_filter,
+                )
+
+            # NOTE: config.flex is already normalized to positive by get_period_config()
+            relaxed_config = config._replace(
+                flex=current_flex,  # Already positive from normalization
+                level_filter=applied_level_filter,
+            )
 
-        # Try current flex with level="any" (in relaxation mode)
-        if original_level_filter != "any":
             _LOGGER_DETAILS.debug(
-                "%s    Flex=%.1f%%: OVERRIDING level_filter: %s → ANY",
+                "%s    Trying %s: config has %d intervals (all days together), level_filter=%s",
                 INDENT_L2,
-                current_flex * 100,
-                original_level_filter,
-            )
-
-        # NOTE: config.flex is already normalized to positive by get_period_config()
-        relaxed_config = config._replace(
-            flex=current_flex,  # Already positive from normalization
-            level_filter="any",
-        )
-
-        phase_label_full = f"flex={current_flex * 100:.1f}% +level_any"
-        _LOGGER_DETAILS.debug(
-            "%s    Trying %s: config has %d intervals (all days together), level_filter=%s",
-            INDENT_L2,
-            phase_label_full,
-            len(all_prices),
-            relaxed_config.level_filter,
-        )
-
-        # Process ALL prices together (allows midnight crossing)
-        result = calculate_periods(
-            all_prices,
-            config=relaxed_config,
-            time=time,
-            day_patterns_by_date=day_patterns_by_date,
-        )
-        new_periods = result["periods"]
-
-        _LOGGER_DETAILS.debug(
-            "%s    %s: calculate_periods returned %d periods",
-            INDENT_L2,
-            phase_label_full,
-            len(new_periods),
-        )
-
-        # Mark newly found periods with relaxation metadata BEFORE merging
-        mark_periods_with_relaxation(
-            new_periods,
-            relaxation_level=phase_label_full,
-            original_threshold=base_flex,
-            applied_threshold=current_flex,
-            reverse_sort=config.reverse_sort,
-        )
-
-        # Resolve overlaps between existing and new periods
-        combined, standalone_count = resolve_period_overlaps(
-            existing_periods=existing_periods,
-            new_relaxed_periods=new_periods,
-            all_prices=all_prices,
-            config=config,
-            time=time,
-        )
-
-        # Count periods per day with QUALITY GATE check
-        # Only periods with CV <= PERIOD_MAX_CV count towards min_periods requirement
-        days_meeting_requirement, quality_period_count = _count_quality_periods(
-            combined, all_prices, prices_by_day, min_periods, time=time
-        )
-
-        total_periods = len(combined)
-        _LOGGER_DETAILS.debug(
-            "%s    %s: found %d periods total, %d/%d days meet requirement",
-            INDENT_L2,
-            phase_label_full,
-            total_periods,
-            days_meeting_requirement,
-            total_days,
-        )
-
-        existing_periods = combined
-        phases_used.append(phase_label_full)
-
-        # Check if ALL days reached target
-        if days_meeting_requirement >= total_days:
-            _LOGGER.info(
-                "Success with %s - all %d days have %d+ periods (%d total)",
                 phase_label_full,
-                total_days,
-                min_periods,
-                total_periods,
+                len(all_prices),
+                relaxed_config.level_filter,
             )
+
+            # Process ALL prices together (allows midnight crossing)
+            result = calculate_periods(
+                all_prices,
+                config=relaxed_config,
+                time=time,
+                day_patterns_by_date=day_patterns_by_date,
+            )
+            new_periods = result["periods"]
+
+            _LOGGER_DETAILS.debug(
+                "%s    %s: calculate_periods returned %d periods",
+                INDENT_L2,
+                phase_label_full,
+                len(new_periods),
+            )
+
+            # Mark newly found periods with relaxation metadata BEFORE merging
+            mark_periods_with_relaxation(
+                new_periods,
+                relaxation_level=phase_label_full,
+                original_threshold=base_flex,
+                applied_threshold=current_flex,
+                reverse_sort=config.reverse_sort,
+            )
+
+            # Resolve overlaps between existing and new periods
+            combined, standalone_count = resolve_period_overlaps(
+                existing_periods=existing_periods,
+                new_relaxed_periods=new_periods,
+                all_prices=all_prices,
+                config=config,
+                time=time,
+            )
+
+            # Count periods per day with QUALITY GATE check
+            # Only periods with CV <= PERIOD_MAX_CV count towards min_periods requirement
+            days_meeting_requirement, quality_period_count = _count_quality_periods(
+                combined, all_prices, prices_by_day, min_periods, time=time
+            )
+
+            total_periods = len(combined)
+            _LOGGER_DETAILS.debug(
+                "%s    %s: found %d periods total, %d/%d days meet requirement",
+                INDENT_L2,
+                phase_label_full,
+                total_periods,
+                days_meeting_requirement,
+                total_days,
+            )
+
+            existing_periods = combined
+            phases_used.append(phase_label_full)
+
+            # Check if ALL days reached target
+            if days_meeting_requirement >= total_days:
+                _LOGGER.info(
+                    "Success with %s - all %d days have %d+ periods (%d total)",
+                    phase_label_full,
+                    total_days,
+                    min_periods,
+                    total_periods,
+                )
+                break
+
+        if days_meeting_requirement >= total_days:
             break
 
     # Build final result

custom_components/tibber_prices/coordinator/periods.py

@@ -907,8 +907,9 @@ class TibberPricesPeriodCalculator:
         )
 
         # Check if best price periods should be shown
-        # If relaxation is enabled, always calculate (relaxation will try "any" filter)
-        # If relaxation is disabled, apply level filter check
+        # If relaxation is enabled, always calculate (relaxation tries configured level filter
+        # first, then falls back to "any" per flex step if still insufficient)
+        # If relaxation is disabled, apply level filter check upfront
         if enable_relaxation_best:
             show_best_price = bool(all_prices)
         else:
@@ -1009,8 +1010,9 @@ class TibberPricesPeriodCalculator:
         )
 
         # Check if peak price periods should be shown
-        # If relaxation is enabled, always calculate (relaxation will try "any" filter)
-        # If relaxation is disabled, apply level filter check
+        # If relaxation is enabled, always calculate (relaxation tries configured level filter
+        # first, then falls back to "any" per flex step if still insufficient)
+        # If relaxation is disabled, apply level filter check upfront
         if enable_relaxation_peak:
             show_peak_price = bool(all_prices)
         else:

custom_components/tibber_prices/manifest.json

@@ -1,11 +1,15 @@
 {
   "domain": "tibber_prices",
   "name": "Tibber Price Information & Ratings",
-  "codeowners": ["@jpawlowski"],
+  "codeowners": [
+    "@jpawlowski"
+  ],
   "config_flow": true,
   "documentation": "https://github.com/jpawlowski/hass.tibber_prices",
   "iot_class": "cloud_polling",
   "issue_tracker": "https://github.com/jpawlowski/hass.tibber_prices/issues",
-  "requirements": ["aiofiles>=23.2.1"],
-  "version": "0.31.0b3"
+  "requirements": [
+    "aiofiles>=23.2.1"
+  ],
+  "version": "0.31.0b4"
 }

custom_components/tibber_prices/sensor/chart_metadata.py

@@ -138,6 +138,14 @@ def build_chart_metadata_attributes(
         if "max" in yaxis_suggested:
             attributes["yaxis_max"] = yaxis_suggested["max"]
 
+        # Add per-source yaxis bounds (for energy/tax price_source in charts)
+        for source in ("energy", "tax"):
+            yaxis_extra = metadata.get(f"yaxis_suggested_{source}", {})
+            if "min" in yaxis_extra:
+                attributes[f"yaxis_min_{source}"] = yaxis_extra["min"]
+            if "max" in yaxis_extra:
+                attributes[f"yaxis_max_{source}"] = yaxis_extra["max"]
+
         # Add currency info (useful for labeling)
         if "currency" in metadata:
             attributes["currency"] = metadata["currency"]

custom_components/tibber_prices/services.yaml

@@ -56,6 +56,17 @@ get_apexcharts_yaml:
             - interval
             - hourly
           translation_key: resolution
+    price_source:
+      required: false
+      default: total
+      example: energy
+      selector:
+        select:
+          options:
+            - total
+            - energy
+            - tax
+          translation_key: price_source
     highlight_best_price:
       required: false
       default: true
@@ -100,6 +111,17 @@ get_chartdata:
                 - interval
                 - hourly
               translation_key: resolution
+        price_source:
+          required: false
+          default: total
+          example: energy
+          selector:
+            select:
+              options:
+                - total
+                - energy
+                - tax
+              translation_key: price_source
     filters:
       collapsed: true
       fields:
@@ -989,6 +1011,11 @@ find_cheapest_schedule:
             - next_24h
             - next_48h
           translation_key: search_scope
+    include_current_interval:
+      required: false
+      default: true
+      selector:
+        boolean:
     search_range:
       collapsed: true
       fields:

custom_components/tibber_prices/services/find_cheapest_block.py

@@ -191,6 +191,7 @@ def _attempt_find_block(
     duration_intervals: int,
     smooth_outliers: bool,
     min_distance_from_avg: float | None,
+    power_profile: list[int] | None,
     reverse: bool,
 ) -> tuple[dict | None, str]:
     """Attempt to find a block with specific filter parameters.
@@ -207,7 +208,9 @@ def _attempt_find_block(
     else:
         search_data = filtered
 
-    result = find_cheapest_contiguous_window(search_data, duration_intervals, reverse=reverse)
+    result = find_cheapest_contiguous_window(
+        search_data, duration_intervals, reverse=reverse, power_profile=power_profile
+    )
 
     if result is None:
         return None, _determine_no_window_reason(
@@ -335,6 +338,7 @@ async def _handle_find_block(
         duration_intervals=effective_duration,
         smooth_outliers=smooth_outliers,
         min_distance_from_avg=min_distance_from_avg,
+        power_profile=power_profile,
         reverse=reverse,
     )
 
@@ -362,6 +366,7 @@ async def _handle_find_block(
                 duration_intervals=effective_duration,
                 smooth_outliers=smooth_outliers,
                 min_distance_from_avg=step.min_distance_from_avg,
+                power_profile=power_profile,
                 reverse=reverse,
             )
             if result is not None:
@@ -411,7 +416,9 @@ async def _handle_find_block(
     effective_duration_minutes = effective_duration * INTERVAL_MINUTES
 
     # Find the opposite-direction window for price comparison (from full unfiltered list)
-    comparison_result = find_cheapest_contiguous_window(price_info, effective_duration, reverse=not reverse)
+    comparison_result = find_cheapest_contiguous_window(
+        price_info, effective_duration, reverse=not reverse, power_profile=power_profile
+    )
 
     # Calculate statistics and build response
     stats = calculate_window_statistics(

custom_components/tibber_prices/services/find_cheapest_schedule.py

@@ -113,6 +113,7 @@ FIND_CHEAPEST_SCHEDULE_SERVICE_SCHEMA = vol.Schema(
         ),
         vol.Optional("must_finish_by"): or_entity_ref(cv.datetime),
         vol.Optional("search_scope"): vol.In(VALID_SEARCH_SCOPES),
+        vol.Optional("include_current_interval", default=True): cv.boolean,
         vol.Optional("max_price_level"): vol.In([lvl.lower() for lvl in PRICE_LEVEL_ORDER]),
         vol.Optional("min_price_level"): vol.In([lvl.lower() for lvl in PRICE_LEVEL_ORDER]),
         vol.Optional("include_comparison_details", default=False): cv.boolean,
@@ -133,10 +134,13 @@ def _compute_task_price_comparison(
     unit_factor: int,
     *,
     include_details: bool,
+    power_profile: list[int] | None = None,
 ) -> dict[str, float | str | None] | None:
     """Compute per-task comparison against most expensive window of same duration."""
     duration_intervals = len(task_intervals)
-    comparison_result = find_cheapest_contiguous_window(full_price_info, duration_intervals, reverse=True)
+    comparison_result = find_cheapest_contiguous_window(
+        full_price_info, duration_intervals, reverse=True, power_profile=power_profile
+    )
     if comparison_result is None:
         return None
 
@@ -196,6 +200,8 @@ def _find_cheapest_window_in_pool(
     pool: list[dict[str, Any]],
     duration_intervals: int,
     available: list[bool],
+    *,
+    power_profile: list[int] | None = None,
 ) -> tuple[int, int] | None:
     """
     Find the cheapest contiguous window of `duration_intervals` in available pool slots.
@@ -204,6 +210,9 @@ def _find_cheapest_window_in_pool(
         pool: Full sorted interval list.
         duration_intervals: Required contiguous count.
         available: Boolean mask, same length as pool. True = still available.
+        power_profile: Optional watt value per interval for weighted scoring.
+            Only the first duration_intervals values are used. When provided,
+            scoring uses \u03a3 price[i] \u00d7 watt[i] instead of \u03a3 price[i].
 
     Returns:
         (start_index, end_index_exclusive) of the best window, or None if not found.
@@ -235,7 +244,10 @@ def _find_cheapest_window_in_pool(
             j += 1
 
         if len(block) == duration_intervals:
-            window_sum = sum(iv["total"] for iv in block)
+            if power_profile:
+                window_sum = sum(block[k]["total"] * power_profile[k] for k in range(len(block)))
+            else:
+                window_sum = sum(iv["total"] for iv in block)
             if best_sum is None or window_sum < best_sum:
                 best_sum = window_sum
                 best_start = i
@@ -306,7 +318,9 @@ def _attempt_schedule(
             for k in range(min(sequential_min_idx, len(search_data))):
                 available[k] = False
 
-        window = _find_cheapest_window_in_pool(search_data, dur_intervals, available)
+        window = _find_cheapest_window_in_pool(
+            search_data, dur_intervals, available, power_profile=task.get("power_profile")
+        )
 
         if window is None:
             unscheduled.append(task["name"])
@@ -622,6 +636,7 @@ async def handle_find_cheapest_schedule(call: ServiceCall) -> ServiceResponse:
                     price_info,
                     unit_factor,
                     include_details=include_comparison_details,
+                    power_profile=task.get("power_profile"),
                 ),
             }
         )

custom_components/tibber_prices/services/get_apexcharts_yaml.py

@@ -57,6 +57,7 @@ APEXCHARTS_SERVICE_SCHEMA = vol.Schema(
         vol.Optional("day"): vol.In(["yesterday", "today", "tomorrow", "rolling_window", "rolling_window_autozoom"]),
         vol.Optional("level_type", default="rating_level"): vol.In(["rating_level", "level"]),
         vol.Optional("resolution", default="interval"): vol.In(["interval", "hourly"]),
+        vol.Optional("price_source", default="total"): vol.In(["total", "energy", "tax"]),
         vol.Optional("highlight_best_price", default=True): cv.boolean,
         vol.Optional("highlight_peak_price", default=False): cv.boolean,
     }
@@ -288,6 +289,7 @@ async def handle_apexcharts_yaml(call: ServiceCall) -> dict[str, Any]:  # noqa:
     day = call.data.get("day")  # Can be None (rolling window mode)
     level_type = call.data.get("level_type", "rating_level")
     resolution = call.data.get("resolution", "interval")
+    price_source = call.data.get("price_source", "total")
     highlight_best_price = call.data.get("highlight_best_price", True)
     highlight_peak_price = call.data.get("highlight_peak_price", False)
 
@@ -366,7 +368,7 @@ async def handle_apexcharts_yaml(call: ServiceCall) -> dict[str, Any]:  # noqa:
             f"return_response: true, "
             f"service_data: {{ entry_id: '{entry_id}', {day_param}"
             f"period_filter: 'best_price', resolution: '{resolution}', "
-            f"output_format: 'array_of_arrays', insert_nulls: 'segments', subunit_currency: {subunit_param} }} }}); "
+            f"output_format: 'array_of_arrays', insert_nulls: 'segments', subunit_currency: {subunit_param}, price_source: '{price_source}' }} }}); "
             f"const originalData = response.response.data; "
             f"return originalData.map((point, i) => {{ "
             f"const result = [point[0], point[1] === null ? null : 1]; "
@@ -410,7 +412,7 @@ async def handle_apexcharts_yaml(call: ServiceCall) -> dict[str, Any]:  # noqa:
             f"return_response: true, "
             f"service_data: {{ entry_id: '{entry_id}', {day_param}"
             f"period_filter: 'peak_price', resolution: '{resolution}', "
-            f"output_format: 'array_of_arrays', insert_nulls: 'segments', subunit_currency: {subunit_param} }} }}); "
+            f"output_format: 'array_of_arrays', insert_nulls: 'segments', subunit_currency: {subunit_param}, price_source: '{price_source}' }} }}); "
             f"const originalData = response.response.data; "
             f"return originalData.map((point, i) => {{ "
             f"const result = [point[0], point[1] === null ? null : 1]; "
@@ -472,7 +474,7 @@ async def handle_apexcharts_yaml(call: ServiceCall) -> dict[str, Any]:  # noqa:
                 f"return_response: true, "
                 f"service_data: {{ entry_id: '{entry_id}', {day_param}{filter_param}, resolution: '{resolution}', "
                 f"output_format: 'array_of_arrays', insert_nulls: 'segments', subunit_currency: {subunit_param}, "
-                f"connect_segments: true }} }}); "
+                f"price_source: '{price_source}', connect_segments: true }} }}); "
                 f"return response.response.data;"
             )
         else:
@@ -485,7 +487,7 @@ async def handle_apexcharts_yaml(call: ServiceCall) -> dict[str, Any]:  # noqa:
                 f"return_response: true, "
                 f"service_data: {{ entry_id: '{entry_id}', {day_param}{filter_param}, resolution: '{resolution}', "
                 f"output_format: 'array_of_arrays', insert_nulls: 'segments', subunit_currency: {subunit_param}, "
-                f"connect_segments: true }} }}); "
+                f"price_source: '{price_source}', connect_segments: true }} }}); "
                 f"return response.response.data;"
             )
         # Configure show options based on level_type and level_key
@@ -820,10 +822,12 @@ async def handle_apexcharts_yaml(call: ServiceCall) -> dict[str, Any]:  # noqa:
                 variables_dict = {"v_graph_span": template_graph_span}
                 if use_sensor_metadata:
                     # Add dynamic metadata variables from sensor
+                    # Use price-source-specific yaxis attrs when not using 'total'
+                    yaxis_attr_suffix = f"_{price_source}" if price_source != "total" else ""
                     variables_dict.update(
                         {
-                            "v_yaxis_min": f"states['{chart_metadata_sensor}'].attributes.yaxis_min",
-                            "v_yaxis_max": f"states['{chart_metadata_sensor}'].attributes.yaxis_max",
+                            "v_yaxis_min": f"states['{chart_metadata_sensor}'].attributes.yaxis_min{yaxis_attr_suffix}",
+                            "v_yaxis_max": f"states['{chart_metadata_sensor}'].attributes.yaxis_max{yaxis_attr_suffix}",
                         }
                     )
 
@@ -985,10 +989,12 @@ async def handle_apexcharts_yaml(call: ServiceCall) -> dict[str, Any]:  # noqa:
             variables_dict = {"v_offset": template_value}
             if use_sensor_metadata:
                 # Add dynamic metadata variables from sensor
+                # Use price-source-specific yaxis attrs when not using 'total'
+                yaxis_attr_suffix = f"_{price_source}" if price_source != "total" else ""
                 variables_dict.update(
                     {
-                        "v_yaxis_min": f"states['{chart_metadata_sensor}'].attributes.yaxis_min",
-                        "v_yaxis_max": f"states['{chart_metadata_sensor}'].attributes.yaxis_max",
+                        "v_yaxis_min": f"states['{chart_metadata_sensor}'].attributes.yaxis_min{yaxis_attr_suffix}",
+                        "v_yaxis_max": f"states['{chart_metadata_sensor}'].attributes.yaxis_max{yaxis_attr_suffix}",
                     }
                 )
 

custom_components/tibber_prices/services/get_chartdata.py

@@ -279,6 +279,7 @@ CHARTDATA_SERVICE_SCHEMA: Final = vol.Schema(
         vol.Optional("include_level", default=False): bool,
         vol.Optional("include_rating_level", default=False): bool,
         vol.Optional("include_average", default=False): bool,
+        vol.Optional("price_source", default="total"): vol.In(["total", "energy", "tax"]),
         vol.Optional("include_energy", default=False): bool,
         vol.Optional("include_tax", default=False): bool,
         vol.Optional("level_filter"): vol.All(
@@ -380,6 +381,7 @@ async def handle_chartdata(call: ServiceCall) -> dict[str, Any]:  # noqa: C901
     subunit_currency = data.get("subunit_currency", False)
     metadata = data.get("metadata", "include")
     round_decimals = data.get("round_decimals")
+    price_source = data.get("price_source", "total")
     include_level = data.get("include_level", False)
     include_rating_level = data.get("include_rating_level", False)
     include_average = data.get("include_average", False)
@@ -453,7 +455,7 @@ async def handle_chartdata(call: ServiceCall) -> dict[str, Any]:  # noqa: C901
         chart_data_for_meta = []
         for interval in all_intervals:
             start_time = interval.get("startsAt")
-            price = interval.get("total")
+            price = interval.get(price_source)
             if start_time is not None and price is not None:
                 # Convert price to requested currency
                 converted_price = round(price * 100, 2) if subunit_currency else round(price, 4)
@@ -474,6 +476,33 @@ async def handle_chartdata(call: ServiceCall) -> dict[str, Any]:  # noqa: C901
             subunit_currency=subunit_currency,
         )
 
+        # Always add yaxis bounds for energy and tax sources so the chart_metadata
+        # sensor can expose them regardless of which price_source was requested.
+        # This lets get_apexcharts_yaml pick the right axis when price_source != "total".
+        def _yaxis_for_source(source: str) -> dict[str, float] | None:
+            prices = [
+                (round(float(iv[source]) * 100, 2) if subunit_currency else round(float(iv[source]), 4))
+                for iv in all_intervals
+                if iv.get(source) is not None
+            ]
+            if not prices:
+                return None
+            data_range = max(prices) - min(prices)
+            padding_below = data_range * 0.08
+            padding_above = data_range * 0.15
+            if data_range == 0:
+                padding_below = abs(prices[0]) * 0.08 or (0.8 if subunit_currency else 0.008)
+                padding_above = abs(prices[0]) * 0.15 or (1.5 if subunit_currency else 0.015)
+            if subunit_currency:
+                return {"min": round(min(prices) - padding_below, 1), "max": round(max(prices) + padding_above, 1)}
+            return {"min": round(min(prices) - padding_below, 2), "max": round(max(prices) + padding_above, 2)}
+
+        for extra_source in ("energy", "tax"):
+            if extra_source != price_source:
+                yaxis_extra = _yaxis_for_source(extra_source)
+                if yaxis_extra:
+                    metadata[f"yaxis_suggested_{extra_source}"] = yaxis_extra
+
         result_meta: dict[str, Any] = {"metadata": metadata}
         if resolved_refs:
             result_meta["_resolved"] = resolved_refs
@@ -601,7 +630,7 @@ async def handle_chartdata(call: ServiceCall) -> dict[str, Any]:  # noqa: C901
 
         # Calculate average if requested
         if include_average:
-            prices = [p["total"] for p in day_intervals if p.get("total") is not None]
+            prices = [p[price_source] for p in day_intervals if p.get(price_source) is not None]
             if prices:
                 avg = sum(prices) / len(prices)
                 # Apply same transformations as to regular prices
@@ -652,7 +681,7 @@ async def handle_chartdata(call: ServiceCall) -> dict[str, Any]:  # noqa: C901
                     # No data for this timestamp - skip entirely
                     continue
 
-                price = interval.get("total")
+                price = interval.get(price_source)
                 if price is None:
                     continue
 
@@ -704,7 +733,7 @@ async def handle_chartdata(call: ServiceCall) -> dict[str, Any]:  # noqa: C901
 
             for interval in all_prices:
                 start_time = interval.get("startsAt")
-                price = interval.get("total")
+                price = interval.get(price_source)
 
                 if start_time is None or price is None:
                     continue
@@ -760,8 +789,8 @@ async def handle_chartdata(call: ServiceCall) -> dict[str, Any]:  # noqa: C901
                 next_interval = all_prices[i + 1]
 
                 start_time = interval.get("startsAt")
-                price = interval.get("total")
-                next_price = next_interval.get("total")
+                price = interval.get(price_source)
+                next_price = next_interval.get(price_source)
                 next_start_time = next_interval.get("startsAt")
 
                 if start_time is None or price is None:
@@ -770,7 +799,7 @@ async def handle_chartdata(call: ServiceCall) -> dict[str, Any]:  # noqa: C901
                 interval_value = interval.get(filter_field)
                 next_value = next_interval.get(filter_field)
                 prev_value = all_prices[i - 1].get(filter_field) if i > 0 else None
-                prev_price = all_prices[i - 1].get("total") if i > 0 else None
+                prev_price = all_prices[i - 1].get(price_source) if i > 0 else None
 
                 # Check if current interval matches filter
                 if interval_value in filter_values:  # type: ignore[operator]
@@ -921,7 +950,7 @@ async def handle_chartdata(call: ServiceCall) -> dict[str, Any]:  # noqa: C901
             if all_prices:
                 last_interval = all_prices[-1]
                 last_start_time = last_interval.get("startsAt")
-                last_price = last_interval.get("total")
+                last_price = last_interval.get(price_source)
                 last_value = last_interval.get(filter_field)
 
                 if last_start_time and last_price is not None and last_value in filter_values:  # type: ignore[operator]
@@ -975,7 +1004,7 @@ async def handle_chartdata(call: ServiceCall) -> dict[str, Any]:  # noqa: C901
             # Mode 'none' (default): Only return matching intervals, no NULL insertion
             for interval in all_prices:
                 start_time = interval.get("startsAt")
-                price = interval.get("total")
+                price = interval.get(price_source)
 
                 if start_time is not None and price is not None:
                     # Apply period filter if specified

custom_components/tibber_prices/services/helpers.py

@@ -357,7 +357,13 @@ def _resolve_time_with_day_offset(
     )
 
 
-def _resolve_scope(scope: str, now: datetime, _home_tz: ZoneInfo) -> tuple[datetime, datetime]:
+def _resolve_scope(
+    scope: str,
+    now: datetime,
+    _home_tz: ZoneInfo,
+    *,
+    include_current: bool,
+) -> tuple[datetime, datetime]:
     """
     Convert a search_scope shorthand into explicit start/end datetimes.
 
@@ -374,16 +380,18 @@ def _resolve_scope(scope: str, now: datetime, _home_tz: ZoneInfo) -> tuple[datet
     tomorrow_start = today_start + timedelta(days=1)
     day_after_start = today_start + timedelta(days=2)
 
+    rolling_start = floor_to_quarter_hour(now) if include_current else now
+
     if scope == "today":
         return today_start, tomorrow_start
     if scope == "tomorrow":
         return tomorrow_start, day_after_start
     if scope == "remaining_today":
-        return floor_to_quarter_hour(now), tomorrow_start
+        return rolling_start, tomorrow_start
     if scope == "next_24h":
-        return floor_to_quarter_hour(now), now + timedelta(hours=24)
+        return rolling_start, now + timedelta(hours=24)
     if scope == "next_48h":
-        return floor_to_quarter_hour(now), now + timedelta(hours=48)
+        return rolling_start, now + timedelta(hours=48)
 
     raise ServiceValidationError(
         translation_domain=DOMAIN,
@@ -517,7 +525,7 @@ def resolve_search_range(
 
     # Priority 0: search_scope shorthand
     if "search_scope" in call_data:
-        return _resolve_scope(call_data["search_scope"], now, home_tz)
+        return _resolve_scope(call_data["search_scope"], now, home_tz, include_current=include_current)
 
     # --- Resolve start ---
     if "search_start" in call_data:

custom_components/tibber_prices/translations/de.json

@@ -195,6 +195,17 @@
         },
         "submit": "↩ Speichern & Zurück"
       },
+      "price_level": {
+        "title": "🏷️ Preisniveau-Einstellungen (von Tibber API)",
+        "description": "**Konfiguriere die Stabilisierung für Tibbers Preisniveau-Klassifizierung (sehr günstig/günstig/normal/teuer/sehr teuer).**\n\nTibbers API liefert ein Preisniveau-Feld für jedes Intervall. Diese Einstellung glättet kurze Schwankungen, um Instabilität in Automatisierungen zu verhindern.{entity_warning}",
+        "data": {
+          "price_level_gap_tolerance": "Gap-Toleranz"
+        },
+        "data_description": {
+          "price_level_gap_tolerance": "Maximale Anzahl aufeinanderfolgender Intervalle, die 'geglättet' werden können, wenn sie von umgebenden Preisniveaus abweichen. Kleine isolierte Niveauänderungen werden mit dem dominanten Nachbarblock zusammengeführt. Beispiel: 1 bedeutet, dass ein einzelnes 'normal'-Intervall, umgeben von 'günstig'-Intervallen, zu 'günstig' korrigiert wird. Auf 0 setzen zum Deaktivieren. Standard: 1"
+        },
+        "submit": "↩ Speichern & Zurück"
+      },
       "best_price": {
         "title": "💚 Bestpreis-Zeitraum Einstellungen",
         "description": "**Konfiguration für den Bestpreis-Zeitraum mit den niedrigsten Strompreisen.**{entity_warning}{override_warning}\n\n---",
@@ -375,17 +386,6 @@
           "confirm_reset": "Ja, alles auf Werkseinstellungen zurücksetzen"
         },
         "submit": "Jetzt zurücksetzen"
-      },
-      "price_level": {
-        "title": "🏷️ Preisniveau-Einstellungen (von Tibber API)",
-        "description": "**Konfiguriere die Stabilisierung für Tibbers Preisniveau-Klassifizierung (sehr günstig/günstig/normal/teuer/sehr teuer).**\n\nTibbers API liefert ein Preisniveau-Feld für jedes Intervall. Diese Einstellung glättet kurze Schwankungen, um Instabilität in Automatisierungen zu verhindern.{entity_warning}",
-        "data": {
-          "price_level_gap_tolerance": "Gap-Toleranz"
-        },
-        "data_description": {
-          "price_level_gap_tolerance": "Maximale Anzahl aufeinanderfolgender Intervalle, die 'geglättet' werden können, wenn sie von umgebenden Preisniveaus abweichen. Kleine isolierte Niveauänderungen werden mit dem dominanten Nachbarblock zusammengeführt. Beispiel: 1 bedeutet, dass ein einzelnes 'normal'-Intervall, umgeben von 'günstig'-Intervallen, zu 'günstig' korrigiert wird. Auf 0 setzen zum Deaktivieren. Standard: 1"
-        },
-        "submit": "↩ Speichern & Zurück"
       }
     },
     "error": {
@@ -395,11 +395,11 @@
       "cannot_connect": "Verbindung fehlgeschlagen",
       "invalid_access_token": "Ungültiges Zugriffstoken",
       "different_home": "Der Zugriffstoken ist nicht gültig für die Home ID, für die diese Integration konfiguriert ist.",
+      "invalid_period_length": "Die Periodenlänge muss mindestens 15 Minuten betragen (Vielfache von 15).",
       "invalid_flex": "Flexibilitätsprozentsatz muss zwischen -50% und +50% liegen",
       "invalid_best_price_distance": "Distanzprozentsatz muss zwischen -50% und 0% liegen (negativ = unter Durchschnitt)",
       "invalid_peak_price_distance": "Distanzprozentsatz muss zwischen 0% und 50% liegen (positiv = über Durchschnitt)",
       "invalid_min_periods": "Mindestanzahl der Zeiträume muss zwischen 1 und 10 liegen",
-      "invalid_period_length": "Die Periodenlänge muss mindestens 15 Minuten betragen (Vielfache von 15).",
       "invalid_gap_count": "Lückentoleranz muss zwischen 0 und 8 liegen",
       "invalid_relaxation_attempts": "Lockerungsversuche müssen zwischen 1 und 12 liegen",
       "invalid_price_rating_low": "Untere Preis-Bewertungsschwelle muss zwischen -50% und -5% liegen",
@@ -1389,6 +1389,14 @@
           "name": "Stufen-Typ",
           "description": "Wähle, welche Preisstufen-Klassifizierung visualisiert werden soll: 'rating_level' (niedrig/normal/hoch basierend auf deinen konfigurierten Schwellenwerten) oder 'level' (Tibber-API-Stufen: sehr günstig/günstig/normal/teuer/sehr teuer)."
         },
+        "resolution": {
+          "name": "Auflösung",
+          "description": "Zeitauflösung für die Diagrammdaten. 'interval' (Standard): Originale 15-Minuten-Intervalle (96 Punkte pro Tag). 'hourly': Aggregierte Stundenwerte mit einem rollierenden 60-Minuten-Fenster (24 Punkte pro Tag) für ein übersichtlicheres Diagramm."
+        },
+        "price_source": {
+          "name": "Preisquelle",
+          "description": "Welche Preiskomponente als Hauptpreis verwendet werden soll. 'total' (Standard): Gesamtpreis inkl. Energie, Steuern und Gebühren. 'energy': Nur der reine Spot-/Energiepreis (ohne Steuern und Gebühren). 'tax': Nur Steuer- und Gebührenanteil."
+        },
         "highlight_best_price": {
           "name": "Bestpreis-Zeiträume hervorheben",
           "description": "Füge eine halbtransparente grüne Überlagerung hinzu, um die Bestpreis-Zeiträume im Diagramm hervorzuheben. Dies erleichtert die visuelle Identifizierung der optimalen Zeiten für den Energieverbrauch."
@@ -1396,10 +1404,6 @@
         "highlight_peak_price": {
           "name": "Spitzenpreis-Zeiträume hervorheben",
           "description": "Füge eine halbtransparente rote Überlagerung hinzu, um die Spitzenpreis-Zeiträume im Diagramm hervorzuheben. Dies erleichtert die visuelle Identifizierung der Zeiten, in denen Energie am teuersten ist."
-        },
-        "resolution": {
-          "name": "Auflösung",
-          "description": "Zeitauflösung für die Diagrammdaten. 'interval' (Standard): Originale 15-Minuten-Intervalle (96 Punkte pro Tag). 'hourly': Aggregierte Stundenwerte mit einem rollierenden 60-Minuten-Fenster (24 Punkte pro Tag) für ein übersichtlicheres Diagramm."
         }
       }
     },
@@ -1449,6 +1453,10 @@
           "name": "Auflösung",
           "description": "Zeitauflösung für die zurückgegebenen Daten. Optionen: 'interval' (Standard, 15-Minuten-Intervalle, 96 Datenpunkte pro Tag), 'hourly' (stündliche Durchschnitte, 24 Datenpunkte pro Tag)."
         },
+        "price_source": {
+          "name": "Preisquelle",
+          "description": "Welche Preiskomponente als Hauptpreis verwendet werden soll. 'total' (Standard): Gesamtpreis inkl. Energie, Steuern und Gebühren. 'energy': Nur der reine Spot-/Energiepreis (ohne Steuern und Gebühren). 'tax': Nur Steuer- und Gebührenanteil."
+        },
         "output_format": {
           "name": "Ausgabeformat",
           "description": "Ausgabeformat für die zurückgegebenen Daten. Optionen: 'array_of_objects' (Standard, Array von Objekten mit anpassbaren Feldnamen), 'array_of_arrays' (Array von [Zeitstempel, Preis]-Arrays mit abschließendem Null-Punkt für Stepline-Charts)."
@@ -1465,6 +1473,10 @@
           "name": "Dezimalstellen runden",
           "description": "Anzahl der Dezimalstellen, auf die Preise gerundet werden sollen (0-10). Falls nicht angegeben, wird die Standardgenauigkeit verwendet (4 Dezimalstellen für Basiswährung, 2 für Unterwährungseinheit)."
         },
+        "data_key": {
+          "name": "Daten-Schlüssel",
+          "description": "Benutzerdefinierter Name für den obersten Datenschlüssel in der Antwort. Standard ist 'data', falls nicht angegeben."
+        },
         "include_level": {
           "name": "Preisniveau einschließen",
           "description": "Fügt das Tibber-Preisniveau (sehr günstig/günstig/normal/teuer/sehr teuer) zu jedem Datenpunkt hinzu."
@@ -1544,10 +1556,6 @@
         "metadata": {
           "name": "Metadaten",
           "description": "Steuerung der Metadaten-Einbindung in der Antwort. 'include' (Standard): Gibt Chart-Daten und Metadaten mit Preisstatistiken, Währungsinformationen, Y-Achsen-Vorschlägen und Zeitbereich zurück. 'only': Gibt nur Metadaten zurück ohne Chart-Daten zu verarbeiten (schnell, nützlich für dynamische Y-Achsen-Konfiguration). 'none': Gibt nur Chart-Daten ohne Metadaten zurück."
-        },
-        "data_key": {
-          "name": "Daten-Schlüssel",
-          "description": "Benutzerdefinierter Name für den obersten Datenschlüssel in der Antwort. Standard ist 'data', falls nicht angegeben."
         }
       }
     },
@@ -1661,7 +1669,7 @@
         },
         "power_profile": {
           "name": "Leistungsprofil",
-          "description": "Variable Leistungsaufnahme in Watt pro 15-Minuten-Intervall. Wenn gesetzt, gibt estimated_total_cost den tatsächlichen Verbrauch statt einer festen 1-kW-Last an."
+          "description": "Variable Leistungsaufnahme in Watt pro 15-Minuten-Intervall. Beeinflusst die Fensterauswahl (Phasen mit hoher Leistung landen auf den günstigsten bzw. teuersten Intervallen) und die Kostenberechnung (estimated_total_cost nutzt den tatsächlichen Verbrauch statt einer festen 1-kW-Last)."
         },
         "smooth_outliers": {
           "name": "Ausreißer glätten",
@@ -1781,7 +1789,7 @@
         },
         "power_profile": {
           "name": "Leistungsprofil",
-          "description": "Variable Leistungsaufnahme in Watt pro 15-Minuten-Intervall. Wenn gesetzt, gibt estimated_total_cost den tatsächlichen Verbrauch statt einer festen 1-kW-Last an."
+          "description": "Variable Leistungsaufnahme in Watt pro 15-Minuten-Intervall. Beeinflusst die Fensterauswahl (Phasen mit hoher Leistung landen auf den günstigsten bzw. teuersten Intervallen) und die Kostenberechnung (estimated_total_cost nutzt den tatsächlichen Verbrauch statt einer festen 1-kW-Last)."
         },
         "smooth_outliers": {
           "name": "Ausreißer glätten",
@@ -1905,7 +1913,7 @@
         },
         "power_profile": {
           "name": "Leistungsprofil",
-          "description": "Variable Leistungsaufnahme in Watt pro 15-Minuten-Intervall. Wenn gesetzt, gibt estimated_total_cost den tatsächlichen Verbrauch statt einer festen 1-kW-Last an."
+          "description": "Variable Leistungsaufnahme in Watt pro 15-Minuten-Intervall. Beeinflusst nur die Kostenberechnung (estimated_total_cost nutzt den tatsächlichen Verbrauch statt einer festen 1-kW-Last). Profilgewichtete Auswahl gilt nicht für nicht-zusammenhängende Intervalle."
         },
         "smooth_outliers": {
           "name": "Ausreißer glätten",
@@ -2029,7 +2037,7 @@
         },
         "power_profile": {
           "name": "Leistungsprofil",
-          "description": "Variable Leistungsaufnahme in Watt pro 15-Minuten-Intervall. Wenn gesetzt, gibt estimated_total_cost den tatsächlichen Verbrauch statt einer festen 1-kW-Last an."
+          "description": "Variable Leistungsaufnahme in Watt pro 15-Minuten-Intervall. Beeinflusst nur die Kostenberechnung (estimated_total_cost nutzt den tatsächlichen Verbrauch statt einer festen 1-kW-Last). Profilgewichtete Auswahl gilt nicht für nicht-zusammenhängende Intervalle."
         },
         "smooth_outliers": {
           "name": "Ausreißer glätten",
@@ -2131,6 +2139,10 @@
           "name": "Suchende-Versatz (Minuten)",
           "description": "Alternative: Suche endet in dieser Anzahl Minuten ab jetzt. Positiv = Zukunft (480 = in 8 Stunden), negativ = Vergangenheit (-60 = vor 1 Stunde). Wird ignoriert, wenn Suchende oder Suchende-Uhrzeit gesetzt ist."
         },
+        "include_current_interval": {
+          "name": "Aktuelles Intervall einbeziehen",
+          "description": "Das aktuell laufende 15-Minuten-Intervall in die Suche einbeziehen. Wenn aktiviert, starten rollierende Suchbereiche wie remaining_today und next_24h am Beginn des aktuellen Intervalls, sodass es ausgewählt werden kann."
+        },
         "max_price_level": {
           "name": "Maximale Preisstufe",
           "description": "Nur Intervalle bis zu dieser Tibber-Preisstufe berücksichtigen. very_cheap = restriktivste, very_expensive = keine Einschränkung."
@@ -2364,6 +2376,16 @@
           "description": "Limit how many separate charging segments may be used per day. The planner keeps the cheapest segments within this limit."
         }
       }
+    },
+    "debug_clear_tomorrow": {
+      "name": "Debug: Morgendaten löschen",
+      "description": "DEBUG/TESTING: Entfernt die Preisdaten für morgen aus dem Interval-Pool-Cache. Verwende dies, um den Aktualisierungszyklus für Morgendaten zu testen, ohne auf den nächsten Tag zu warten. Nach dem Aufruf dieses Dienstes zeigt der Lifecycle-Sensor 'searching_tomorrow' (nach 13:00 Uhr) an und der nächste Timer-#1-Zyklus lädt neue Daten von der API.",
+      "fields": {
+        "entry_id": {
+          "name": "Eintrag-ID",
+          "description": "Optionale Konfigurationseintrag-ID. Wenn sie nicht angegeben ist, wird der erste verfügbare Eintrag verwendet."
+        }
+      }
     }
   },
   "selector": {
@@ -2428,6 +2450,13 @@
         "peak_price": "Spitzenpreis-Zeiträume"
       }
     },
+    "price_source": {
+      "options": {
+        "total": "Gesamt (inkl. Steuern & Gebühren)",
+        "energy": "Nur Energiepreis",
+        "tax": "Nur Steuern & Gebühren"
+      }
+    },
     "metadata": {
       "options": {
         "include": "Einbeziehen (Daten + Metadaten)",

custom_components/tibber_prices/translations/en.json

@@ -1389,6 +1389,14 @@
           "name": "Level Type",
           "description": "Select which price level classification to visualize: 'rating_level' (low/normal/high based on your configured thresholds) or 'level' (Tibber API levels: very cheap/cheap/normal/expensive/very expensive)."
         },
+        "resolution": {
+          "name": "Resolution",
+          "description": "Time resolution for the chart data. 'interval' (default): Original 15-minute intervals (96 points per day). 'hourly': Aggregated hourly values using a rolling 60-minute window (24 points per day) for a cleaner, less cluttered chart."
+        },
+        "price_source": {
+          "name": "Price Source",
+          "description": "Which price component to use as the main price series. 'total' (default): Total price incl. energy, taxes, and fees. 'energy': Raw spot/energy price only (excluding taxes and fees). 'tax': Taxes and fees only."
+        },
         "highlight_best_price": {
           "name": "Highlight Best Price Periods",
           "description": "Add a semi-transparent green overlay to highlight the best price periods on the chart. This makes it easy to visually identify the optimal times for energy consumption."
@@ -1396,10 +1404,6 @@
         "highlight_peak_price": {
           "name": "Highlight Peak Price Periods",
           "description": "Add a semi-transparent red overlay to highlight the peak price periods on the chart. This makes it easy to visually identify times when energy is most expensive."
-        },
-        "resolution": {
-          "name": "Resolution",
-          "description": "Time resolution for the chart data. 'interval' (default): Original 15-minute intervals (96 points per day). 'hourly': Aggregated hourly values using a rolling 60-minute window (24 points per day) for a cleaner, less cluttered chart."
         }
       }
     },
@@ -1449,6 +1453,10 @@
           "name": "Resolution",
           "description": "Time resolution for the returned data. Options: 'interval' (default, 15-minute intervals, 96 points per day), 'hourly' (hourly averages, 24 points per day)."
         },
+        "price_source": {
+          "name": "Price Source",
+          "description": "Which price component to use as the primary price. 'total' (default): Full price including energy, taxes and fees. 'energy': Raw spot/energy price only (excluding taxes and fees). 'tax': Tax and fee component only."
+        },
         "output_format": {
           "name": "Output Format",
           "description": "Output format for the returned data. Options: 'array_of_objects' (default, array of objects with customizable field names), 'array_of_arrays' (array of [timestamp, price] arrays with trailing null point for stepline charts)."
@@ -1661,7 +1669,7 @@
         },
         "power_profile": {
           "name": "Power Profile",
-          "description": "Variable power draw in watts per 15-minute interval. When set, estimated_total_cost reflects actual consumption instead of a flat 1 kW load. The profile is extended by repeating the last value if shorter than the window."
+          "description": "Variable power draw in watts per 15-minute interval. Affects window selection (high-wattage phases land on cheapest/most expensive intervals) and cost reporting (estimated_total_cost uses actual consumption instead of flat 1 kW)."
         },
         "smooth_outliers": {
           "name": "Smooth Outliers",
@@ -1781,7 +1789,7 @@
         },
         "power_profile": {
           "name": "Power Profile",
-          "description": "Variable power draw in watts per 15-minute interval. When set, estimated_total_cost reflects actual consumption instead of a flat 1 kW load. The profile is extended by repeating the last value if shorter than the window."
+          "description": "Variable power draw in watts per 15-minute interval. Affects window selection (high-wattage phases land on cheapest/most expensive intervals) and cost reporting (estimated_total_cost uses actual consumption instead of flat 1 kW)."
         },
         "smooth_outliers": {
           "name": "Smooth Outliers",
@@ -1905,7 +1913,7 @@
         },
         "power_profile": {
           "name": "Power Profile",
-          "description": "Variable power draw in watts per 15-minute interval. When set, estimated_total_cost reflects actual consumption instead of a flat 1 kW load. The profile is extended by repeating the last value if shorter than the window."
+          "description": "Variable power draw in watts per 15-minute interval. Affects cost reporting only (estimated_total_cost uses actual consumption instead of flat 1 kW). Profile-weighted selection is not applied to non-contiguous interval picks."
         },
         "smooth_outliers": {
           "name": "Smooth Outliers",
@@ -2029,7 +2037,7 @@
         },
         "power_profile": {
           "name": "Power Profile",
-          "description": "Variable power draw in watts per 15-minute interval. When set, estimated_total_cost reflects actual consumption instead of a flat 1 kW load. The profile is extended by repeating the last value if shorter than the window."
+          "description": "Variable power draw in watts per 15-minute interval. Affects cost reporting only (estimated_total_cost uses actual consumption instead of flat 1 kW). Profile-weighted selection is not applied to non-contiguous interval picks."
         },
         "smooth_outliers": {
           "name": "Smooth Outliers",
@@ -2051,7 +2059,7 @@
     },
     "find_cheapest_schedule": {
       "name": "Find Cheapest Schedule",
-      "description": "Schedules multiple appliances optimally without time overlap. Each task gets the cheapest available contiguous window; tasks are placed greedily in ascending cost order. Returns a per-task schedule with start/end times and price stats. If scheduling is incomplete, the response includes a stable reason code in the reason field (for example: no_data_in_range, no_intervals_matching_level_filter, insufficient_contiguous_window, insufficient_contiguous_window_for_some_tasks).",
+      "description": "Schedules multiple appliances optimally without time overlap. Each task gets the cheapest available contiguous window; tasks are placed longest-first for efficient packing unless sequential ordering is enabled. Returns a per-task schedule with start/end times and price stats. If scheduling is incomplete, the response includes a stable reason code in the reason field (for example: no_data_in_range, no_intervals_matching_level_filter, insufficient_contiguous_window, insufficient_contiguous_window_for_some_tasks).",
       "sections": {
         "search_range": {
           "name": "Custom Search Range",
@@ -2131,6 +2139,10 @@
           "name": "Search End Offset (minutes)",
           "description": "Alternative: stop searching this many minutes from now. Positive = future, negative = past. Ignored if Search End or Search End Time is set."
         },
+        "include_current_interval": {
+          "name": "Include Current Interval",
+          "description": "Include the currently running 15-minute interval in the search. When enabled, rolling scopes like remaining_today and next_24h start at the beginning of the current interval so it can be selected."
+        },
         "max_price_level": {
           "name": "Maximum Price Level",
           "description": "Only consider intervals at or below this Tibber price level. very_cheap = most restrictive, very_expensive = no restriction."
@@ -2438,6 +2450,13 @@
         "peak_price": "Peak Price Periods"
       }
     },
+    "price_source": {
+      "options": {
+        "total": "Total (incl. taxes & fees)",
+        "energy": "Energy price only",
+        "tax": "Tax & fees only"
+      }
+    },
     "metadata": {
       "options": {
         "include": "Include (data + metadata)",

custom_components/tibber_prices/translations/nb.json

@@ -195,6 +195,17 @@
         },
         "submit": "↩ Lagre & tilbake"
       },
+      "price_level": {
+        "title": "🏷️ Prisnivå-innstillinger",
+        "description": "**Konfigurer stabilisering for Tibbers prisnivå-klassifisering (veldig billig/billig/normal/dyr/veldig dyr).**\n\nTibbers API gir et prisnivå-felt for hvert intervall. Denne innstillingen jevner ut korte svingninger for å forhindre ustabilitet i automatiseringer.{entity_warning}",
+        "data": {
+          "price_level_gap_tolerance": "Gap-toleranse"
+        },
+        "data_description": {
+          "price_level_gap_tolerance": "Maksimalt antall påfølgende intervaller som kan 'jevnes ut' hvis de avviker fra omkringliggende prisnivåer. Små isolerte nivåendringer slås sammen med den dominerende nabogruppen. Eksempel: 1 betyr at et enkelt 'normal'-intervall omgitt av 'billig'-intervaller korrigeres til 'billig'. Sett til 0 for å deaktivere. Standard: 1"
+        },
+        "submit": "↩ Lagre & tilbake"
+      },
       "best_price": {
         "title": "💚 Beste Prisperiode Innstillinger",
         "description": "**Konfigurer innstillinger for Beste Prisperiode binærsensor. Denne sensoren er aktiv i perioder med de laveste strømprisene.**{entity_warning}{override_warning}\n\n---",
@@ -375,17 +386,6 @@
           "confirm_reset": "Ja, tilbakestill alt til standard"
         },
         "submit": "Tilbakestill nå"
-      },
-      "price_level": {
-        "title": "🏷️ Prisnivå-innstillinger",
-        "description": "**Konfigurer stabilisering for Tibbers prisnivå-klassifisering (veldig billig/billig/normal/dyr/veldig dyr).**\n\nTibbers API gir et prisnivå-felt for hvert intervall. Denne innstillingen jevner ut korte svingninger for å forhindre ustabilitet i automatiseringer.{entity_warning}",
-        "data": {
-          "price_level_gap_tolerance": "Gap-toleranse"
-        },
-        "data_description": {
-          "price_level_gap_tolerance": "Maksimalt antall påfølgende intervaller som kan 'jevnes ut' hvis de avviker fra omkringliggende prisnivåer. Små isolerte nivåendringer slås sammen med den dominerende nabogruppen. Eksempel: 1 betyr at et enkelt 'normal'-intervall omgitt av 'billig'-intervaller korrigeres til 'billig'. Sett til 0 for å deaktivere. Standard: 1"
-        },
-        "submit": "↩ Lagre & tilbake"
       }
     },
     "error": {
@@ -395,11 +395,11 @@
       "cannot_connect": "Kunne ikke koble til",
       "invalid_access_token": "Ugyldig tilgangstoken",
       "different_home": "Tilgangstokenet er ikke gyldig for hjem-ID-en denne integrasjonen er konfigurert for.",
+      "invalid_period_length": "Periodelengden må være minst 15 minutter (multipler av 15).",
       "invalid_flex": "Fleksibilitetsprosent må være mellom -50% og +50%",
       "invalid_best_price_distance": "Avstandsprosent må være mellom -50% og 0% (negativ = under gjennomsnitt)",
       "invalid_peak_price_distance": "Avstandsprosent må være mellom 0% og 50% (positiv = over gjennomsnitt)",
       "invalid_min_periods": "Minimumsantall perioder må være mellom 1 og 10",
-      "invalid_period_length": "Periodelengden må være minst 15 minutter (multipler av 15).",
       "invalid_gap_count": "Gaptoleranse må være mellom 0 og 8",
       "invalid_relaxation_attempts": "Lempingsforsøk må være mellom 1 og 12",
       "invalid_price_rating_low": "Lav prisvurderingsgrense må være mellom -50% og -5%",
@@ -1389,6 +1389,14 @@
           "name": "Nivåtype",
           "description": "Velg hvilken prisnivåklassifisering som skal visualiseres: 'rating_level' (lav/normal/høy basert på dine konfigurerte terskelverdier) eller 'level' (Tibber API-nivåer: veldig billig/billig/normal/dyr/veldig dyr)."
         },
+        "resolution": {
+          "name": "Oppløsning",
+          "description": "Tidsoppløsning for diagramdata. 'interval' (standard): Opprinnelige 15-minutters intervaller (96 punkter per dag). 'hourly': Aggregerte timeverdier med et rullende 60-minutters vindu (24 punkter per dag) for et ryddigere og mindre rotete diagram."
+        },
+        "price_source": {
+          "name": "Priskilde",
+          "description": "Hvilken priskomponent som skal brukes som hovedpris. 'total' (standard): Totalpris inkl. energi, skatter og avgifter. 'energy': Kun rå spot-/energipris (uten skatter og avgifter). 'tax': Kun skatter og avgifter."
+        },
         "highlight_best_price": {
           "name": "Fremhev beste prisperioder",
           "description": "Legg til et halvgjennomsiktig grønt overlegg for å fremheve de beste prisperiodene i diagrammet. Dette gjør det enkelt å visuelt identifisere de optimale tidene for energiforbruk."
@@ -1396,10 +1404,6 @@
         "highlight_peak_price": {
           "name": "Fremhev høyeste prisperioder",
           "description": "Legg til et halvgjennomsiktig rødt overlegg for å fremheve de høyeste prisperiodene i diagrammet. Dette gjør det enkelt å visuelt identifisere tidene når energi er dyrest."
-        },
-        "resolution": {
-          "name": "Oppløsning",
-          "description": "Tidsoppløsning for diagramdata. 'interval' (standard): Opprinnelige 15-minutters intervaller (96 punkter per dag). 'hourly': Aggregerte timeverdier med et rullende 60-minutters vindu (24 punkter per dag) for et ryddigere og mindre rotete diagram."
         }
       }
     },
@@ -1449,6 +1453,10 @@
           "name": "Oppløsning",
           "description": "Tidsoppløsning for de returnerte dataene. Alternativer: 'interval' (standard, 15-minutters intervaller, 96 datapunkter per dag), 'hourly' (timegjennomsnitt, 24 datapunkter per dag)."
         },
+        "price_source": {
+          "name": "Priskilde",
+          "description": "Hvilken priskomponent som skal brukes som hovedpris. 'total' (standard): Totalpris inkl. energi, skatter og avgifter. 'energy': Kun rå spot-/energipris (uten skatter og avgifter). 'tax': Kun skatter og avgifter."
+        },
         "output_format": {
           "name": "Utdataformat",
           "description": "Utdataformat for de returnerte dataene. Alternativer: 'array_of_objects' (standard, array av objekter med tilpassbare feltnavn), 'array_of_arrays' (array av [tidsstempel, pris]-arrays med avsluttende null-punkt for stepline-diagrammer)."
@@ -1465,6 +1473,10 @@
           "name": "Rund desimaler",
           "description": "Antall desimalplasser å runde priser til (0-10). Hvis ikke angitt, brukes standard presisjon (4 desimaler for basisvaluta, 2 for underenhet valuta)."
         },
+        "data_key": {
+          "name": "Datanøkkel",
+          "description": "Tilpasset navn for datanøkkelen på toppnivå i svaret. Standard er 'data' hvis ikke angitt."
+        },
         "include_level": {
           "name": "Inkluder prisnivå",
           "description": "Inkluder Tibber-prisnivåfeltet (veldig billig/billig/normal/dyr/veldig dyr) i hvert datapunkt."
@@ -1544,10 +1556,6 @@
         "metadata": {
           "name": "Metadata",
           "description": "Kontroller metadata-inkludering i svaret. 'include' (standard): Returnerer både diagramdata og metadata med prisstatistikk, valutainformasjon, Y-akse forslag og tidsperiode. 'only': Returnerer bare metadata uten å behandle diagramdata (raskt, nyttig for dynamisk Y-akse konfigurasjon). 'none': Returnerer bare diagramdata uten metadata."
-        },
-        "data_key": {
-          "name": "Datanøkkel",
-          "description": "Tilpasset navn for datanøkkelen på toppnivå i svaret. Standard er 'data' hvis ikke angitt."
         }
       }
     },
@@ -1661,7 +1669,7 @@
         },
         "power_profile": {
           "name": "Effektprofil",
-          "description": "Variabelt effektforbruk i watt per 15-minuttersintervall. Naa satt, gjenspeiler estimated_total_cost faktisk forbruk i stedet for en fast 1 kW-last."
+          "description": "Variabelt effektforbruk i watt per 15-minuttersintervall. Påvirker valg av tidsvindu (faser med høyt forbruk legges til de billigste/dyreste intervallene) og kostnadsrapportering (estimated_total_cost bruker faktisk forbruk i stedet for en fast 1 kW-last)."
         },
         "smooth_outliers": {
           "name": "Glatt utliggere",
@@ -1781,7 +1789,7 @@
         },
         "power_profile": {
           "name": "Effektprofil",
-          "description": "Variabelt effektforbruk i watt per 15-minuttersintervall. Naa satt, gjenspeiler estimated_total_cost faktisk forbruk i stedet for en fast 1 kW-last."
+          "description": "Variabelt effektforbruk i watt per 15-minuttersintervall. Påvirker valg av tidsvindu (faser med høyt forbruk legges til de billigste/dyreste intervallene) og kostnadsrapportering (estimated_total_cost bruker faktisk forbruk i stedet for en fast 1 kW-last)."
         },
         "smooth_outliers": {
           "name": "Glatt utliggere",
@@ -1905,7 +1913,7 @@
         },
         "power_profile": {
           "name": "Effektprofil",
-          "description": "Variabelt effektforbruk i watt per 15-minuttersintervall. Naa satt, gjenspeiler estimated_total_cost faktisk forbruk i stedet for en fast 1 kW-last."
+          "description": "Variabelt effektforbruk i watt per 15-minuttersintervall. Påvirker kun kostnadsrapportering (estimated_total_cost bruker faktisk forbruk i stedet for en fast 1 kW-last). Profilveiet utvalg gjelder ikke for ikke-sammenhengende intervaller."
         },
         "smooth_outliers": {
           "name": "Glatt utliggere",
@@ -2029,7 +2037,7 @@
         },
         "power_profile": {
           "name": "Effektprofil",
-          "description": "Variabelt effektforbruk i watt per 15-minuttersintervall. Naa satt, gjenspeiler estimated_total_cost faktisk forbruk i stedet for en fast 1 kW-last."
+          "description": "Variabelt effektforbruk i watt per 15-minuttersintervall. Påvirker kun kostnadsrapportering (estimated_total_cost bruker faktisk forbruk i stedet for en fast 1 kW-last). Profilveiet utvalg gjelder ikke for ikke-sammenhengende intervaller."
         },
         "smooth_outliers": {
           "name": "Glatt utliggere",
@@ -2131,6 +2139,10 @@
           "name": "Søkeslutt-forskyvning (minutter)",
           "description": "Alternativ: Stopp søk dette antall minutter fra nå. Positiv = fremtid (480 = om 8 timer), negativ = fortid (-60 = 1 time siden). Ignoreres hvis Søkeslutt eller Søkeslutt-klokkeslett er satt."
         },
+        "include_current_interval": {
+          "name": "Ta med gjeldende intervall",
+          "description": "Ta med det pågående 15-minuttersintervallet i søket. Når dette er aktivert, starter rullerende søkeområder som remaining_today og next_24h ved starten av gjeldende intervall slik at det kan velges."
+        },
         "max_price_level": {
           "name": "Maksimalt prisnivaae",
           "description": "Ta bare med intervaller paa eller under dette Tibber-prisnivaeet. very_cheap = mest restriktivt, very_expensive = ingen begrensning."
@@ -2364,6 +2376,16 @@
           "description": "Limit how many separate charging segments may be used per day. The planner keeps the cheapest segments within this limit."
         }
       }
+    },
+    "debug_clear_tomorrow": {
+      "name": "Debug: Tøm morgendata",
+      "description": "DEBUG/TESTING: Fjerner morgendagens prisdata fra interval pool-cachen. Bruk dette for å teste oppdateringssyklusen for morgendata uten å vente til neste dag. Etter at denne tjenesten er kalt, vil lifecycle-sensoren vise 'searching_tomorrow' (etter kl. 13:00), og neste Timer #1-syklus vil hente nye data fra API-et.",
+      "fields": {
+        "entry_id": {
+          "name": "Oppførings-ID",
+          "description": "Valgfri konfigurasjonsoppførings-ID. Hvis den ikke er angitt, brukes den første tilgjengelige oppføringen."
+        }
+      }
     }
   },
   "selector": {
@@ -2428,6 +2450,13 @@
         "peak_price": "Topp prisperioder"
       }
     },
+    "price_source": {
+      "options": {
+        "total": "Totalt (inkl. skatter og avgifter)",
+        "energy": "Kun energipris",
+        "tax": "Kun skatter og avgifter"
+      }
+    },
     "metadata": {
       "options": {
         "include": "Inkluder (data + metadata)",

custom_components/tibber_prices/translations/nl.json

@@ -29,7 +29,7 @@
         "data": {
           "home_id": "Huis"
         },
-        "title": "Kies een Huis",
+        "title": "Kies een huis",
         "submit": "Huis selecteren"
       },
       "finish": {
@@ -195,6 +195,17 @@
         },
         "submit": "↩ Opslaan & Terug"
       },
+      "price_level": {
+        "title": "🏷️ Prijsniveau-instellingen",
+        "description": "**Configureer stabilisatie voor Tibbers prijsniveau-classificatie (zeer goedkoop/goedkoop/normaal/duur/zeer duur).**\n\nTibbers API levert een prijsniveau-veld voor elk interval. Deze instelling egaliseer korte fluctuaties om instabiliteit in automatiseringen te voorkomen.{entity_warning}",
+        "data": {
+          "price_level_gap_tolerance": "Gap-tolerantie"
+        },
+        "data_description": {
+          "price_level_gap_tolerance": "Maximaal aantal opeenvolgende intervallen dat 'afgevlakt' kan worden als ze afwijken van omringende prijsniveaus. Kleine geïsoleerde niveauwijzigingen worden samengevoegd met het dominante aangrenzende blok. Voorbeeld: 1 betekent dat een enkel 'normaal'-interval omringd door 'goedkoop'-intervallen wordt gecorrigeerd naar 'goedkoop'. Stel in op 0 om uit te schakelen. Standaard: 1"
+        },
+        "submit": "↩ Opslaan & terug"
+      },
       "best_price": {
         "title": "💚 Beste Prijs Periode Instellingen",
         "description": "**Configureer instellingen voor de Beste Prijs Periode binaire sensor. Deze sensor is actief tijdens periodes met de laagste elektriciteitsprijzen.**{entity_warning}{override_warning}\n\n---",
@@ -375,17 +386,6 @@
           "confirm_reset": "Ja, reset alles naar standaardwaarden"
         },
         "submit": "Nu Resetten"
-      },
-      "price_level": {
-        "title": "🏷️ Prijsniveau-instellingen",
-        "description": "**Configureer stabilisatie voor Tibbers prijsniveau-classificatie (zeer goedkoop/goedkoop/normaal/duur/zeer duur).**\n\nTibbers API levert een prijsniveau-veld voor elk interval. Deze instelling egaliseer korte fluctuaties om instabiliteit in automatiseringen te voorkomen.{entity_warning}",
-        "data": {
-          "price_level_gap_tolerance": "Gap-tolerantie"
-        },
-        "data_description": {
-          "price_level_gap_tolerance": "Maximaal aantal opeenvolgende intervallen dat 'afgevlakt' kan worden als ze afwijken van omringende prijsniveaus. Kleine geïsoleerde niveauwijzigingen worden samengevoegd met het dominante aangrenzende blok. Voorbeeld: 1 betekent dat een enkel 'normaal'-interval omringd door 'goedkoop'-intervallen wordt gecorrigeerd naar 'goedkoop'. Stel in op 0 om uit te schakelen. Standaard: 1"
-        },
-        "submit": "↩ Opslaan & terug"
       }
     },
     "error": {
@@ -1389,17 +1389,21 @@
           "name": "Niveautype",
           "description": "Selecteer welke prijsniveauclassificatie gevisualiseerd moet worden: 'rating_level' (laag/normaal/hoog op basis van jouw geconfigureerde drempelwaarden) of 'level' (Tibber API-niveaus: zeer goedkoop/goedkoop/normaal/duur/zeer duur)."
         },
+        "resolution": {
+          "name": "Resolutie",
+          "description": "Tijdresolutie voor de grafiekdata. 'interval' (standaard): Originele 15-minutenintervallen (96 punten per dag). 'hourly': Geaggregeerde uurwaarden met een rollend 60-minutenvenster (24 punten per dag) voor een overzichtelijkere grafiek."
+        },
+        "price_source": {
+          "name": "Prijsbron",
+          "description": "Welke prijscomponent als hoofdprijs gebruikt wordt. 'total' (standaard): Totaalprijs incl. energie, belastingen en kosten. 'energy': Alleen de ruwe spot-/energieprijs (exclusief belastingen en kosten). 'tax': Alleen belastingen en kosten."
+        },
         "highlight_best_price": {
           "name": "Beste prijsperiodes markeren",
-          "description": "Voeg een halfdo0rzichtige groene overlay toe om de beste prijsperiodes in de grafiek te markeren. Dit maakt het gemakkelijk om visueel de optimale tijden voor energieverbruik te identificeren."
+          "description": "Voeg een halfdoorzichtige groene overlay toe om de beste prijsperiodes in de grafiek te markeren. Dit maakt het gemakkelijk om visueel de optimale tijden voor energieverbruik te identificeren."
         },
         "highlight_peak_price": {
           "name": "Piekprijsperiodes markeren",
           "description": "Voeg een halfdoorzichtige rode overlay toe om de piekprijsperiodes in de grafiek te markeren. Dit maakt het gemakkelijk om visueel de tijden te identificeren wanneer energie het duurst is."
-        },
-        "resolution": {
-          "name": "Resolutie",
-          "description": "Tijdresolutie voor de grafiekdata. 'interval' (standaard): Originele 15-minutenintervallen (96 punten per dag). 'hourly': Geaggregeerde uurwaarden met een rollend 60-minutenvenster (24 punten per dag) voor een overzichtelijkere grafiek."
         }
       }
     },
@@ -1449,6 +1453,10 @@
           "name": "Resolutie",
           "description": "Tijdsresolutie voor de geretourneerde gegevens. Opties: 'interval' (standaard, 15-minuten intervallen, 96 datapunten per dag), 'hourly' (uurgemiddelden, 24 datapunten per dag)."
         },
+        "price_source": {
+          "name": "Prijsbron",
+          "description": "Welke prijscomponent als hoofdprijs gebruikt wordt. 'total' (standaard): Totaalprijs incl. energie, belastingen en kosten. 'energy': Alleen de ruwe spot-/energieprijs (exclusief belastingen en kosten). 'tax': Alleen belastingen en kosten."
+        },
         "output_format": {
           "name": "Uitvoerformaat",
           "description": "Uitvoerformaat voor de geretourneerde gegevens. Opties: 'array_of_objects' (standaard, array van objecten met aanpasbare veldnamen), 'array_of_arrays' (array van [tijdstempel, prijs]-arrays met afsluitend null-punt voor stepline-grafieken)."
@@ -1465,6 +1473,10 @@
           "name": "Decimalen afronden",
           "description": "Aantal decimalen om prijzen op af te ronden (0-10). Indien niet opgegeven, wordt de standaardprecisie gebruikt (4 decimalen voor basisvaluta, 2 voor subeenheid valuta)."
         },
+        "data_key": {
+          "name": "Gegevenssleutel",
+          "description": "Aangepaste naam voor de gegevenssleutel op het hoogste niveau in het antwoord. Standaard is 'data' als niet opgegeven."
+        },
         "include_level": {
           "name": "Prijsniveau opnemen",
           "description": "Voeg het Tibber-prijsniveauveld (zeer goedkoop/goedkoop/normaal/duur/zeer duur) toe aan elk gegevenspunt."
@@ -1544,10 +1556,6 @@
         "metadata": {
           "name": "Metadata",
           "description": "Beheer metadata-opname in het antwoord. 'include' (standaard): Retourneert zowel grafiekdata als metadata met prijsstatistieken, valuta-info, Y-as suggesties en tijdsbereik. 'only': Retourneert alleen metadata zonder grafiekdata te verwerken (snel, handig voor dynamische Y-as configuratie). 'none': Retourneert alleen grafiekdata zonder metadata."
-        },
-        "data_key": {
-          "name": "Gegevenssleutel",
-          "description": "Aangepaste naam voor de gegevenssleutel op het hoogste niveau in het antwoord. Standaard is 'data' als niet opgegeven."
         }
       }
     },
@@ -1661,7 +1669,7 @@
         },
         "power_profile": {
           "name": "Vermogensprofiel",
-          "description": "Variabel vermogensverbruik in watt per 15-minuten-interval. Indien ingesteld, weerspiegelt estimated_total_cost het werkelijke verbruik."
+          "description": "Variabel vermogensverbruik in watt per 15-minuten-interval. Beïnvloedt vensterselectie (fasen met hoog vermogen worden op de goedkoopste/duurste intervallen geplaatst) en kostenrapportage (estimated_total_cost gebruikt werkelijk verbruik in plaats van een vaste 1 kW-last)."
         },
         "smooth_outliers": {
           "name": "Uitschieters gladstrijken",
@@ -1781,7 +1789,7 @@
         },
         "power_profile": {
           "name": "Vermogensprofiel",
-          "description": "Variabel vermogensverbruik in watt per 15-minuten-interval. Indien ingesteld, weerspiegelt estimated_total_cost het werkelijke verbruik."
+          "description": "Variabel vermogensverbruik in watt per 15-minuten-interval. Beïnvloedt vensterselectie (fasen met hoog vermogen worden op de goedkoopste/duurste intervallen geplaatst) en kostenrapportage (estimated_total_cost gebruikt werkelijk verbruik in plaats van een vaste 1 kW-last)."
         },
         "smooth_outliers": {
           "name": "Uitschieters gladstrijken",
@@ -1905,7 +1913,7 @@
         },
         "power_profile": {
           "name": "Vermogensprofiel",
-          "description": "Variabel vermogensverbruik in watt per 15-minuten-interval. Indien ingesteld, weerspiegelt estimated_total_cost het werkelijke verbruik."
+          "description": "Variabel vermogensverbruik in watt per 15-minuten-interval. Beïnvloedt alleen de kostenrapportage (estimated_total_cost gebruikt werkelijk verbruik in plaats van een vaste 1 kW-last). Profielgewogen selectie geldt niet voor niet-aaneengesloten intervallen."
         },
         "smooth_outliers": {
           "name": "Uitschieters gladstrijken",
@@ -2029,7 +2037,7 @@
         },
         "power_profile": {
           "name": "Vermogensprofiel",
-          "description": "Variabel vermogensverbruik in watt per 15-minuten-interval. Indien ingesteld, weerspiegelt estimated_total_cost het werkelijke verbruik."
+          "description": "Variabel vermogensverbruik in watt per 15-minuten-interval. Beïnvloedt alleen de kostenrapportage (estimated_total_cost gebruikt werkelijk verbruik in plaats van een vaste 1 kW-last). Profielgewogen selectie geldt niet voor niet-aaneengesloten intervallen."
         },
         "smooth_outliers": {
           "name": "Uitschieters gladstrijken",
@@ -2131,6 +2139,10 @@
           "name": "Zoekeinde-offset (minuten)",
           "description": "Alternatief: Stop met zoeken over dit aantal minuten vanaf nu. Positief = toekomst (480 = over 8 uur), negatief = verleden (-60 = 1 uur geleden). Wordt genegeerd als Zoekeinde of Zoekeinde-tijd is ingesteld."
         },
+        "include_current_interval": {
+          "name": "Huidig interval opnemen",
+          "description": "Neem het momenteel lopende interval van 15 minuten mee in de zoekopdracht. Wanneer ingeschakeld, starten rollende scopes zoals remaining_today en next_24h aan het begin van het huidige interval zodat het gekozen kan worden."
+        },
         "max_price_level": {
           "name": "Maximaal prijsniveau",
           "description": "Overweeg alleen intervallen op of onder dit Tibber-prijsniveau. very_cheap = meest restrictief, very_expensive = geen beperking."
@@ -2364,6 +2376,16 @@
           "description": "Limit how many separate charging segments may be used per day. The planner keeps the cheapest segments within this limit."
         }
       }
+    },
+    "debug_clear_tomorrow": {
+      "name": "Debug: Morgengegevens wissen",
+      "description": "DEBUG/TESTEN: Verwijdert de prijsgegevens voor morgen uit de interval-poolcache. Gebruik dit om de vernieuwingscyclus voor morgengegevens te testen zonder op de volgende dag te wachten. Na het aanroepen van deze service toont de lifecycle-sensor 'searching_tomorrow' (na 13:00) en haalt de volgende Timer #1-cyclus nieuwe gegevens op via de API.",
+      "fields": {
+        "entry_id": {
+          "name": "Item-ID",
+          "description": "Optionele config-item-ID. Als die niet is opgegeven, wordt het eerste beschikbare item gebruikt."
+        }
+      }
     }
   },
   "selector": {
@@ -2428,6 +2450,13 @@
         "peak_price": "Piekprijs Periodes"
       }
     },
+    "price_source": {
+      "options": {
+        "total": "Totaal (incl. belastingen & kosten)",
+        "energy": "Alleen energieprijs",
+        "tax": "Alleen belastingen & kosten"
+      }
+    },
     "metadata": {
       "options": {
         "include": "Inbegrepen (data + metadata)",

custom_components/tibber_prices/translations/sv.json

@@ -195,6 +195,17 @@
         },
         "submit": "↩ Spara & tillbaka"
       },
+      "price_level": {
+        "title": "🏷️ Prisnivå-inställningar",
+        "description": "**Konfigurera stabilisering för Tibbers prisnivå-klassificering (mycket billig/billig/normal/dyr/mycket dyr).**\n\nTibbers API tillhandahåller ett prisnivå-fält för varje intervall. Denna inställning jämnar ut korta fluktuationer för att förhindra instabilitet i automatiseringar.{entity_warning}",
+        "data": {
+          "price_level_gap_tolerance": "Gap-tolerans"
+        },
+        "data_description": {
+          "price_level_gap_tolerance": "Maximalt antal på varandra följande intervaller som kan 'jämnas ut' om de avviker från omgivande prisnivåer. Små isolerade nivåförändringar sammanfogas med det dominerande grannblocket. Exempel: 1 betyder att ett enstaka 'normal'-intervall omgivet av 'billig'-intervaller korrigeras till 'billig'. Sätt till 0 för att inaktivera. Standard: 1"
+        },
+        "submit": "↩ Spara & tillbaka"
+      },
       "best_price": {
         "title": "💚 Bästa Prisperiod-inställningar",
         "description": "**Konfigurera inställningar för binärsensorn Bästa Prisperiod. Denna sensor är aktiv under perioder med lägsta elpriserna.**{entity_warning}{override_warning}\n\n---",
@@ -375,17 +386,6 @@
           "confirm_reset": "Ja, återställ allt till standard"
         },
         "submit": "Återställ nu"
-      },
-      "price_level": {
-        "title": "🏷️ Prisnivå-inställningar",
-        "description": "**Konfigurera stabilisering för Tibbers prisnivå-klassificering (mycket billig/billig/normal/dyr/mycket dyr).**\n\nTibbers API tillhandahåller ett prisnivå-fält för varje intervall. Denna inställning jämnar ut korta fluktuationer för att förhindra instabilitet i automatiseringar.{entity_warning}",
-        "data": {
-          "price_level_gap_tolerance": "Gap-tolerans"
-        },
-        "data_description": {
-          "price_level_gap_tolerance": "Maximalt antal på varandra följande intervaller som kan 'jämnas ut' om de avviker från omgivande prisnivåer. Små isolerade nivåförändringar sammanfogas med det dominerande grannblocket. Exempel: 1 betyder att ett enstaka 'normal'-intervall omgivet av 'billig'-intervaller korrigeras till 'billig'. Sätt till 0 för att inaktivera. Standard: 1"
-        },
-        "submit": "↩ Spara & tillbaka"
       }
     },
     "error": {
@@ -1389,6 +1389,14 @@
           "name": "Nivåtyp",
           "description": "Välj vilken prisnivåklassificering som ska visualiseras: 'rating_level' (låg/normal/hög baserat på dina konfigurerade tröskelvärden) eller 'level' (Tibber API-nivåer: mycket billigt/billigt/normalt/dyrt/mycket dyrt)."
         },
+        "resolution": {
+          "name": "Upplösning",
+          "description": "Tidsupplösning för diagramdata. 'interval' (standard): Ursprungliga 15-minutersintervall (96 punkter per dag). 'hourly': Aggregerade timvärden med ett rullande 60-minutersfönster (24 punkter per dag) för ett renare och mindre rörigt diagram."
+        },
+        "price_source": {
+          "name": "Priskälla",
+          "description": "Vilken priskomponent som används som huvudpris. 'total' (standard): Totalpris inkl. energi, skatter och avgifter. 'energy': Enbart rå spot-/energipris (exkl. skatter och avgifter). 'tax': Enbart skatter och avgifter."
+        },
         "highlight_best_price": {
           "name": "Markera bästa prisperioder",
           "description": "Lägg till ett halvtransparent grönt överlag för att markera de bästa prisperioderna i diagrammet. Detta gör det enkelt att visuellt identifiera de optimala tiderna för energiförbrukning."
@@ -1396,10 +1404,6 @@
         "highlight_peak_price": {
           "name": "Markera högsta prisperioder",
           "description": "Lägg till ett halvtransparent rött överlag för att markera de högsta prisperioderna i diagrammet. Detta gör det enkelt att visuellt identifiera tiderna när energi är som dyrast."
-        },
-        "resolution": {
-          "name": "Upplösning",
-          "description": "Tidsupplösning för diagramdata. 'interval' (standard): Ursprungliga 15-minutersintervall (96 punkter per dag). 'hourly': Aggregerade timvärden med ett rullande 60-minutersfönster (24 punkter per dag) för ett renare och mindre rörigt diagram."
         }
       }
     },
@@ -1449,6 +1453,10 @@
           "name": "Upplösning",
           "description": "Tidsupplösning för returnerad data. Alternativ: 'interval' (standard, 15-minutersintervall, 96 punkter per dag), 'hourly' (timmedelvärden, 24 punkter per dag)."
         },
+        "price_source": {
+          "name": "Priskälla",
+          "description": "Vilken priskomponent som används som huvudpris. 'total' (standard): Totalpris inkl. energi, skatter och avgifter. 'energy': Enbart rå spot-/energipris (exkl. skatter och avgifter). 'tax': Enbart skatter och avgifter."
+        },
         "output_format": {
           "name": "Utdataformat",
           "description": "Utdataformat för returnerad data. Alternativ: 'array_of_objects' (standard, array av objekt med anpassningsbara fältnamn), 'array_of_arrays' (array av [tidstämpel, pris]-arrays med avslutande null-punkt för stegdiagram)."
@@ -1661,7 +1669,7 @@
         },
         "power_profile": {
           "name": "Effektprofil",
-          "description": "Variabel effektfoerbruekning i watt per 15-minutersintervall. Om instaellt, aaterspeglar estimated_total_cost faktisk foerbruekning istaellet foer en fast 1 kW-last."
+          "description": "Variabel effektförbrukning i watt per 15-minutersintervall. Påverkar fönsterurval (faser med hög effekt placeras på billigaste/dyraste intervallen) och kostnadsrapportering (estimated_total_cost använder faktisk förbrukning istället för en fast 1 kW-last)."
         },
         "smooth_outliers": {
           "name": "Jämna utliggare",
@@ -1781,7 +1789,7 @@
         },
         "power_profile": {
           "name": "Effektprofil",
-          "description": "Variabel effektfoerbruekning i watt per 15-minutersintervall. Om instaellt, aaterspeglar estimated_total_cost faktisk foerbruekning istaellet foer en fast 1 kW-last."
+          "description": "Variabel effektförbrukning i watt per 15-minutersintervall. Påverkar fönsterurval (faser med hög effekt placeras på billigaste/dyraste intervallen) och kostnadsrapportering (estimated_total_cost använder faktisk förbrukning istället för en fast 1 kW-last)."
         },
         "smooth_outliers": {
           "name": "Jämna utliggare",
@@ -1905,7 +1913,7 @@
         },
         "power_profile": {
           "name": "Effektprofil",
-          "description": "Variabel effektfoerbruekning i watt per 15-minutersintervall. Om instaellt, aaterspeglar estimated_total_cost faktisk foerbruekning istaellet foer en fast 1 kW-last."
+          "description": "Variabel effektförbrukning i watt per 15-minutersintervall. Påverkar bara kostnadsrapportering (estimated_total_cost använder faktisk förbrukning istället för en fast 1 kW-last). Profilvägt urval tillämpas inte för icke-sammanhängande intervaller."
         },
         "smooth_outliers": {
           "name": "Jämna utliggare",
@@ -2029,7 +2037,7 @@
         },
         "power_profile": {
           "name": "Effektprofil",
-          "description": "Variabel effektfoerbruekning i watt per 15-minutersintervall. Om instaellt, aaterspeglar estimated_total_cost faktisk foerbruekning istaellet foer en fast 1 kW-last."
+          "description": "Variabel effektförbrukning i watt per 15-minutersintervall. Påverkar bara kostnadsrapportering (estimated_total_cost använder faktisk förbrukning istället för en fast 1 kW-last). Profilvägt urval tillämpas inte för icke-sammanhängande intervaller."
         },
         "smooth_outliers": {
           "name": "Jämna utliggare",
@@ -2131,6 +2139,10 @@
           "name": "Sökslut-förskjutning (minuter)",
           "description": "Alternativ: Sluta söka detta antal minuter från nu. Positivt = framtid (480 = om 8 timmar), negativt = förflutet (-60 = 1 timme sedan). Ignoreras om Sökslut eller Sökslut-klockslag är satt."
         },
+        "include_current_interval": {
+          "name": "Inkludera aktuellt intervall",
+          "description": "Inkludera det pågående 15-minutersintervallet i sökningen. När detta är aktiverat börjar rullande sökomfång som remaining_today och next_24h vid början av det aktuella intervallet så att det kan väljas."
+        },
         "max_price_level": {
           "name": "Maximal prisnivaae",
           "description": "Ta bara med intervall paa eller under denna Tibber-prisnivaae. very_cheap = mest restriktivt, very_expensive = ingen begraensning."
@@ -2364,6 +2376,16 @@
           "description": "Limit how many separate charging segments may be used per day. The planner keeps the cheapest segments within this limit."
         }
       }
+    },
+    "debug_clear_tomorrow": {
+      "name": "Debug: Rensa morgondagens data",
+      "description": "DEBUG/TEST: Tar bort morgondagens prisdata från interval pool-cachen. Använd detta för att testa uppdateringscykeln för morgondagens data utan att vänta till nästa dag. Efter att tjänsten har anropats visar livscykelsensorn 'searching_tomorrow' (efter 13:00) och nästa Timer #1-cykel hämtar nya data från API:et.",
+      "fields": {
+        "entry_id": {
+          "name": "Entry-ID",
+          "description": "Valfritt config entry-ID. Om det inte anges används den första tillgängliga posten."
+        }
+      }
     }
   },
   "selector": {
@@ -2428,6 +2450,13 @@
         "peak_price": "Topprisperioder"
       }
     },
+    "price_source": {
+      "options": {
+        "total": "Totalt (inkl. skatter & avgifter)",
+        "energy": "Enbart energipris",
+        "tax": "Enbart skatter & avgifter"
+      }
+    },
     "metadata": {
       "options": {
         "include": "Inkludera (data + metadata)",

custom_components/tibber_prices/utils/price.py

@@ -979,6 +979,10 @@ def enrich_price_info_with_differences(
     # Apply level gap tolerance as post-processing step
     # This smooths out isolated price level changes from Tibber's API
     if level_gap_tolerance > 0:
+        for interval in all_intervals:
+            level = interval.get("level")
+            if level is not None:
+                interval.setdefault("_original_level", level)
         _apply_level_gap_tolerance(all_intervals, level_gap_tolerance)
 
     return all_intervals

custom_components/tibber_prices/utils/price_window.py

@@ -22,18 +22,24 @@ def find_cheapest_contiguous_window(
     duration_intervals: int,
     *,
     reverse: bool = False,
+    power_profile: list[int] | None = None,
 ) -> dict[str, Any] | None:
     """
     Find the cheapest (or most expensive) contiguous window of exactly N intervals.
 
-    Uses a sliding window algorithm (O(n)) to find the window with the
-    lowest (or highest) average price.
+    Uses a sliding window algorithm (O(n)) when no power profile is given.
+    With a power profile, uses O(n\u00d7k) direct scoring so that the window with the
+    lowest weighted cost (\u03a3 price[i] \u00d7 watt[i]) is selected instead of lowest
+    average price. This ensures high-wattage phases of the cycle land on cheap intervals.
 
     Args:
         intervals: Sorted list of price interval dicts with 'startsAt' and 'total' keys.
             Must be pre-sorted by startsAt in ascending order.
         duration_intervals: Number of consecutive intervals required.
         reverse: If True, find the most expensive window instead of cheapest.
+        power_profile: Optional watt value per interval. Only the first
+            duration_intervals values are used (profile may be longer). When
+            provided, scoring uses \u03a3 price[i] \u00d7 watt[i] instead of \u03a3 price[i].
 
     Returns:
         Dict with window details (start, end, intervals, statistics),
@@ -44,20 +50,47 @@ def find_cheapest_contiguous_window(
     if n == 0 or duration_intervals <= 0 or n < duration_intervals:
         return None
 
-    # Calculate initial window sum
-    window_sum = sum(intervals[i]["total"] for i in range(duration_intervals))
-    best_sum = window_sum
-    best_start = 0
+    best_intervals: list[dict[str, Any]] | None = None
+    best_sum: float | None = None
 
-    # Slide the window
-    for i in range(1, n - duration_intervals + 1):
-        window_sum += intervals[i + duration_intervals - 1]["total"]
-        window_sum -= intervals[i - 1]["total"]
-        if (window_sum > best_sum) if reverse else (window_sum < best_sum):
-            best_sum = window_sum
-            best_start = i
+    # Price-level filtering can create gaps in time. Search each truly contiguous
+    # run independently so the returned window always matches real timestamps.
+    for segment in group_intervals_into_segments(intervals):
+        segment_intervals = segment["intervals"]
+        if len(segment_intervals) < duration_intervals:
+            continue
+
+        if power_profile:
+            # With a power profile the weights rotate with each window position,
+            # so a simple O(1) sliding update is not possible. Recompute each score
+            # directly. Only the first duration_intervals weights are used.
+            segment_best_sum: float = sum(
+                segment_intervals[k]["total"] * power_profile[k] for k in range(duration_intervals)
+            )
+            segment_best_start = 0
+            for i in range(1, len(segment_intervals) - duration_intervals + 1):
+                score = sum(segment_intervals[i + k]["total"] * power_profile[k] for k in range(duration_intervals))
+                if (score > segment_best_sum) if reverse else (score < segment_best_sum):
+                    segment_best_sum = score
+                    segment_best_start = i
+        else:
+            window_sum = sum(segment_intervals[i]["total"] for i in range(duration_intervals))
+            segment_best_sum = window_sum
+            segment_best_start = 0
+            for i in range(1, len(segment_intervals) - duration_intervals + 1):
+                window_sum += segment_intervals[i + duration_intervals - 1]["total"]
+                window_sum -= segment_intervals[i - 1]["total"]
+                if (window_sum > segment_best_sum) if reverse else (window_sum < segment_best_sum):
+                    segment_best_sum = window_sum
+                    segment_best_start = i
+
+        if best_sum is None or ((segment_best_sum > best_sum) if reverse else (segment_best_sum < best_sum)):
+            best_sum = segment_best_sum
+            best_intervals = segment_intervals[segment_best_start : segment_best_start + duration_intervals]
+
+    if best_intervals is None:
+        return None
 
-    best_intervals = intervals[best_start : best_start + duration_intervals]
     return {
         "start": best_intervals[0]["startsAt"],
         "end_interval_start": best_intervals[-1]["startsAt"],
@@ -123,87 +156,101 @@ def _find_with_min_segment(
     """
     Find cheapest/most expensive N intervals with minimum segment length constraint.
 
-    Iteratively picks intervals, discards segments that are too
-    short, and replaces them with next-best alternatives.
-
-    Converges in at most `count` iterations (worst case: every replacement
-    creates a new short segment that gets discarded).
+    Uses dynamic programming to find an exact selection of `count` intervals
+    where every contiguous run has at least `min_segment` intervals. Real time
+    gaps break segments even if the filtered list remains index-contiguous.
     """
     n = len(intervals)
 
-    # Build index lookup: interval original index → position
-    # Price-sorted indices for picking cheapest/most expensive available
-    price_order = sorted(range(n), key=lambda i: intervals[i]["total"], reverse=reverse)
+    contiguous_with_prev = [False] * n
+    for i in range(1, n):
+        prev_start = _parse_timestamp(intervals[i - 1]["startsAt"])
+        curr_start = _parse_timestamp(intervals[i]["startsAt"])
+        contiguous_with_prev[i] = curr_start - prev_start == timedelta(minutes=15)
 
-    selected: set[int] = set()
-    excluded: set[int] = set()
+    def is_better(new_cost: float, old_cost: float | None) -> bool:
+        if old_cost is None:
+            return True
+        return new_cost > old_cost if reverse else new_cost < old_cost
 
-    # Initial pick: cheapest 'count' intervals
-    picked = 0
-    for idx in price_order:
-        if picked >= count:
-            break
-        if idx not in excluded:
-            selected.add(idx)
-            picked += 1
+    current_states: dict[tuple[int, int], float] = {(0, 0): 0.0}
+    backpointers: list[dict[tuple[int, int], tuple[tuple[int, int], bool]]] = [{} for _ in range(n + 1)]
 
-    if len(selected) < count:
+    for idx, interval in enumerate(intervals, start=1):
+        next_states: dict[tuple[int, int], float] = {}
+        next_back: dict[tuple[int, int], tuple[tuple[int, int], bool]] = {}
+        interval_cost = float(interval["total"])
+
+        for prev_state, prev_cost in current_states.items():
+            selected_count, run_len = prev_state
+            effective_run_len = run_len
+
+            if idx > 1 and not contiguous_with_prev[idx - 1] and run_len != 0:
+                if run_len < min_segment:
+                    continue
+                effective_run_len = 0
+
+            if effective_run_len in (0, min_segment):
+                skip_state = (selected_count, 0)
+                if is_better(prev_cost, next_states.get(skip_state)):
+                    next_states[skip_state] = prev_cost
+                    next_back[skip_state] = (prev_state, False)
+
+            if selected_count >= count:
+                continue
+
+            if effective_run_len == 0:
+                new_run_len = 1
+            elif effective_run_len < min_segment:
+                new_run_len = effective_run_len + 1
+            else:
+                new_run_len = min_segment
+
+            take_state = (selected_count + 1, new_run_len)
+            take_cost = prev_cost + interval_cost
+            if is_better(take_cost, next_states.get(take_state)):
+                next_states[take_state] = take_cost
+                next_back[take_state] = (prev_state, True)
+
+        current_states = next_states
+        backpointers[idx] = next_back
+
+    best_state: tuple[int, int] | None = None
+    best_cost: float | None = None
+    for state, cost in current_states.items():
+        selected_count, run_len = state
+        if selected_count != count or run_len not in (0, min_segment):
+            continue
+        if is_better(cost, best_cost):
+            best_state = state
+            best_cost = cost
+
+    if best_state is None:
         return None
 
-    # Iterative refinement: discard short segments, replace with next-cheapest
-    max_iterations = count + 1  # Safety bound
-    for _ in range(max_iterations):
-        sorted_selected = sorted(selected)
-        segments = _group_indices_into_segments(sorted_selected)
+    selected_indices: list[int] = []
+    state = best_state
+    for idx in range(n, 0, -1):
+        prev_state, took_interval = backpointers[idx][state]
+        if took_interval:
+            selected_indices.append(idx - 1)
+        state = prev_state
 
-        short_segments = [seg for seg in segments if len(seg) < min_segment]
-        if not short_segments:
-            break  # All segments meet minimum length
-
-        # Exclude all indices in short segments
-        for seg in short_segments:
-            for idx in seg:
-                selected.discard(idx)
-                excluded.add(idx)
-
-        # Refill from price order
-        needed = count - len(selected)
-        for idx in price_order:
-            if needed <= 0:
-                break
-            if idx not in selected and idx not in excluded:
-                selected.add(idx)
-                needed -= 1
-
-        if len(selected) < count:
-            # Not enough intervals available after exclusions
-            # Return best effort with what we have
-            break
-
-    sorted_selected = sorted(selected)
-    result_intervals = [intervals[i] for i in sorted_selected]
+    selected_indices.reverse()
+    result_intervals = [intervals[i] for i in selected_indices]
     segments = group_intervals_into_segments(result_intervals)
 
+    if len(result_intervals) != count:
+        return None
+    if any(seg["interval_count"] < min_segment for seg in segments):
+        return None
+
     return {
         "intervals": result_intervals,
         "segments": segments,
     }
 
 
-def _group_indices_into_segments(indices: list[int]) -> list[list[int]]:
-    """Group sorted integer indices into contiguous runs."""
-    if not indices:
-        return []
-
-    segments: list[list[int]] = [[indices[0]]]
-    for i in range(1, len(indices)):
-        if indices[i] == indices[i - 1] + 1:
-            segments[-1].append(indices[i])
-        else:
-            segments.append([indices[i]])
-    return segments
-
-
 def group_intervals_into_segments(
     intervals: list[dict[str, Any]],
 ) -> list[dict[str, Any]]:

docs/user/docs/scheduling-actions.md

@@ -135,20 +135,26 @@ These parameters are available across all scheduling actions:
 | Parameter | Description | Default |
 |-----------|-------------|---------|
 | `entry_id` | Config entry ID. Auto-selects if you only have one home. | Auto |
-| `include_current_interval` | Include the currently running 15-minute interval in the search? | `true` |
+| `include_current_interval` | Include the currently running 15-minute interval in the search? Only applies to `remaining_today`, `next_24h`, `next_48h`, and default (no scope) — has no effect for `today` or `tomorrow` (those always cover the full calendar day). | `true` |
 | `min_price_level` | Only consider intervals at or above this Tibber level | — |
 | `max_price_level` | Only consider intervals at or below this Tibber level | — |
 | `smooth_outliers` | Smooth price outliers before searching (see [below](#outlier-smoothing)) | `true` |
 | `min_distance_from_avg` | Require result to differ from average by X% (see [below](#minimum-distance-from-average)) | — |
 | `allow_relaxation` | Progressively loosen filters to guarantee a result (see [below](#relaxation)) | `true` |
 | `duration_flexibility_minutes` | Max minutes the duration may be shortened during relaxation (see [below](#relaxation)) | Auto |
-| `power_profile` | Watt values per 15-min interval for accurate cost estimates | — |
+| `power_profile` | Watt values per 15-min interval. Affects **window selection** for block/schedule services and cost reporting for all services (see note below). | — |
 | `use_base_unit` | Use base currency (EUR, NOK) instead of subunit (ct, øre) | `false` |
 
 :::note `min_distance_from_avg` availability
 `min_distance_from_avg` is available in `find_cheapest_block`, `find_most_expensive_block`, `find_cheapest_hours`, and `find_most_expensive_hours`. It is **not** available in `find_cheapest_schedule` (multi-task semantics make a single threshold ambiguous).
 :::
 
+:::note `power_profile` selection impact
+For `find_cheapest_block`, `find_most_expensive_block`, and `find_cheapest_schedule`, the profile controls **which window is selected**: each candidate is scored by weighted cost (Σ price × watt per interval) so high-wattage phases land on the cheapest (or most expensive) intervals.
+
+For `find_cheapest_hours` and `find_most_expensive_hours`, the profile only affects cost reporting — non-contiguous interval picks make profile-weighted selection semantically undefined.
+:::
+
 ### Price Level Filtering
 
 Restrict the search to specific Tibber price levels. Levels from lowest to highest: `very_cheap`, `cheap`, `normal`, `expensive`, `very_expensive`.
@@ -169,7 +175,12 @@ data:
 
 ### Power Profile
 
-By default, cost estimates assume a constant 1 kW load. If your appliance has variable power draw, provide a power profile — **one watt value per 15-minute interval**:
+By default, cost estimates assume a constant 1 kW load. If your appliance has variable power draw, provide a power profile — **one watt value per 15-minute interval**.
+
+When a power profile is present it affects **both selection and reporting**:
+
+- **Selection** — instead of lowest average price, each candidate window is scored by weighted cost (Σ price × watt per interval). High-wattage phases of the cycle are placed on the cheapest intervals.
+- **Reporting** — `estimated_total_cost` and `estimated_load_kwh` reflect the actual variable power draw.
 
 <details>
 <summary>Show YAML: Power Profile</summary>
@@ -190,8 +201,6 @@ data:
 
   </details>
 
-The service then calculates `estimated_total_cost` using the actual power draw per interval instead of flat 1 kW, and adds `estimated_load_kwh` (total energy consumed) to the response.
-
 :::info Duration and profile must match
 The number of entries in `power_profile` must exactly match the number of 15-minute intervals in `duration`. A 2-hour duration needs 8 entries.
 :::
@@ -731,6 +740,7 @@ response_variable: result
 | `unscheduled_tasks` | List of task names that couldn't be placed (or `null` if all succeeded) |
 | `tasks[]` | Each task with its assigned time window and price statistics |
 | `tasks[].start` / `tasks[].end` | When to start and stop each appliance |
+| `tasks[].price_comparison` | Optional per-task comparison against the opposite extreme window when `include_comparison_details` is `true` |
 | `total_estimated_cost` | Combined cost across all tasks |
 | `relaxation_applied` | `true` if [relaxation](#relaxation) was needed to schedule all tasks |
 | `relaxation_steps` | Number of relaxation steps applied (only when `relaxation_applied` is `true`) |
@@ -740,7 +750,7 @@ response_variable: result
 If you call `find_cheapest_block` separately for each appliance, they might all find the **same** cheap time window. `find_cheapest_schedule` solves this by tracking which intervals are already claimed — each appliance gets its own non-overlapping slot.
 
 :::tip Sequential ordering
-By default, `find_cheapest_schedule` optimizes purely for **price** — it does not guarantee task order. The dryer could be scheduled before the washing machine if that's cheaper. For sequential workflows (washing machine → dryer), add `sequential: true` to guarantee declaration-order scheduling. See [Automation Examples — Sequential Scheduling](automation-examples.md#washing-machine--dryer-sequential-scheduling) for a complete example.
+By default, `find_cheapest_schedule` does not guarantee task order. In non-sequential mode, tasks are packed longest-first and each task then gets the cheapest slot that still fits, so the dryer may be scheduled before the washing machine. For sequential workflows (washing machine → dryer), add `sequential: true` to guarantee declaration-order scheduling. See [Automation Examples — Sequential Scheduling](automation-examples.md#washing-machine--dryer-sequential-scheduling) for a complete example.
 :::
 
 ### Gap Minutes
@@ -1005,7 +1015,7 @@ All durations are rounded **up** to the nearest 15 minutes because Tibber price
 
 ### Comparison Details
 
-Add `include_comparison_details: true` to `find_cheapest_block` or `find_cheapest_hours` to get extra fields in the comparison:
+Add `include_comparison_details: true` to `find_cheapest_block`, `find_cheapest_hours`, or `find_cheapest_schedule` to get extra fields in the comparison:
 
 <details>
 <summary>Show YAML: Comparison Details</summary>
@@ -1019,7 +1029,7 @@ data:
 
 </details>
 
-This adds `comparison_price_min`, `comparison_price_max`, and `comparison_window_end` to the `price_comparison` object.
+This adds `comparison_price_min`, `comparison_price_max`, and `comparison_window_end` to the `price_comparison` object. For `find_cheapest_schedule`, these details are added to each task's `price_comparison` object.
 
 ### Response When No Window Found
 
@@ -1041,6 +1051,8 @@ The `reason` field contains a stable machine-readable code you can use in automa
 | `window_below_distance_threshold` | Most expensive block found, but not far enough above average |
 | `selection_above_distance_threshold` | Hours found, but not far enough below average (`min_distance_from_avg`) |
 | `selection_below_distance_threshold` | Most expensive hours found, but not far enough above average |
+| `insufficient_contiguous_window` | No valid contiguous block could be built from the remaining intervals |
+| `insufficient_contiguous_window_for_some_tasks` | Schedule found slots for some tasks, but not all of them |
 | `relaxation_exhausted` | All relaxation steps tried, still no result (only when `allow_relaxation: true`) |
 
 Always check the failure fields in your automations before using the results.

tests/services/test_search_range.py

@@ -12,6 +12,7 @@ Also validates schema boundaries for all 4 services.
 from __future__ import annotations
 
 from datetime import datetime, time as dt_time, timedelta
+from typing import Any, cast
 from zoneinfo import ZoneInfo
 
 import pytest
@@ -148,6 +149,29 @@ class TestResolveSearchRangeNegativeOffsetMinutes:
         assert start.day == 10
         assert start.hour == 23
 
+    def test_search_scope_excludes_current_interval_when_disabled(self) -> None:
+        """Relative search scopes honor include_current_interval=false."""
+        now = datetime(2026, 4, 11, 14, 37, tzinfo=BERLIN)
+        call_data = {
+            "search_scope": "next_24h",
+            "include_current_interval": False,
+        }
+        start, end = resolve_search_range(call_data, now, BERLIN)
+        assert start == now
+        assert end == now + timedelta(hours=24)
+
+    def test_search_scope_includes_current_interval_when_enabled(self) -> None:
+        """Relative search scopes include the current quarter when enabled."""
+        now = datetime(2026, 4, 11, 14, 37, tzinfo=BERLIN)
+        call_data = {
+            "search_scope": "next_24h",
+            "include_current_interval": True,
+        }
+        start, end = resolve_search_range(call_data, now, BERLIN)
+        assert start.hour == 14
+        assert start.minute == 30
+        assert end == now + timedelta(hours=24)
+
 
 # =============================================================================
 # Schema validation: day_offset boundaries
@@ -160,12 +184,12 @@ class TestSchemaValidation:
     def _validate_block_schema(self, data: dict) -> dict:
         """Validate data through block schema."""
         schema = vol.Schema(_COMMON_BLOCK_SCHEMA)
-        return schema(data)
+        return cast("dict[str, Any]", schema(data))
 
     def _validate_hours_schema(self, data: dict) -> dict:
         """Validate data through hours schema."""
         schema = vol.Schema(_COMMON_HOURS_SCHEMA)
-        return schema(data)
+        return cast("dict[str, Any]", schema(data))
 
     def test_block_schema_accepts_negative_day_offset(self) -> None:
         """Block schema allows negative day offsets."""

tests/services/test_sequential_scheduling.py

@@ -71,6 +71,18 @@ class TestSequentialSchema:
         )
         assert result["sequential"] is False
 
+    def test_schema_defaults_include_current_interval_true(self) -> None:
+        """Schedule schema should expose include_current_interval like other actions."""
+        result = cast(
+            "dict[str, Any]",
+            FIND_CHEAPEST_SCHEDULE_SERVICE_SCHEMA(
+                {
+                    "tasks": [{"name": "dishwasher", "duration": timedelta(hours=1)}],
+                }
+            ),
+        )
+        assert result["include_current_interval"] is True
+
 
 class TestSequentialOrdering:
     """Sequential mode preserves declaration order and chains search windows."""

tests/test_price_window.py

@@ -170,6 +170,87 @@ class TestFindCheapestContiguousWindow:
         selected_prices = [iv["total"] for iv in result["intervals"]]
         assert selected_prices == [5.0, 3.0, 2.0, 8.0]
 
+    def test_gap_breaks_contiguous_window(self) -> None:
+        """A real time gap prevents windows from spanning across it."""
+        intervals = _make_intervals([1.0, 2.0, 3.0, 4.0], gap_after={1})
+        assert find_cheapest_contiguous_window(intervals, 3) is None
+
+
+# =============================================================================
+# find_cheapest_contiguous_window — power_profile weighted scoring
+# =============================================================================
+
+
+class TestFindCheapestContiguousWindowWithPowerProfile:
+    """Tests for power-profile-weighted window selection."""
+
+    def test_profile_changes_selection(self) -> None:
+        """Front-loaded profile prefers placing cheap intervals at high-wattage positions."""
+        # Prices: [10, 10, 5, 5, 10]
+        # Without profile: windows 1 and 2 both sum to 20; first tie wins (index 1, prices [10,5,5])
+        # Profile [3000, 500, 500] — first interval costs 6× more per unit:
+        #   Window 0: 10*3000+10*500+5*500  = 37500
+        #   Window 1: 10*3000+ 5*500+5*500  = 35000
+        #   Window 2:  5*3000+ 5*500+10*500 = 22500  ← cheapest weighted
+        prices = [10.0, 10.0, 5.0, 5.0, 10.0]
+        intervals = _make_intervals(prices)
+
+        result_no_profile = find_cheapest_contiguous_window(intervals, 3)
+        assert result_no_profile is not None
+        assert result_no_profile["intervals"][0]["total"] == 10.0  # index 1
+
+        result_profile = find_cheapest_contiguous_window(intervals, 3, power_profile=[3000, 500, 500])
+        assert result_profile is not None
+        assert result_profile["intervals"][0]["total"] == 5.0  # index 2
+
+    def test_profile_no_effect_with_uniform_weights(self) -> None:
+        """A uniform profile produces the same selection as no profile."""
+        prices = [20.0, 15.0, 5.0, 3.0, 4.0, 18.0, 25.0]
+        intervals = _make_intervals(prices)
+
+        result_no_profile = find_cheapest_contiguous_window(intervals, 3)
+        result_uniform = find_cheapest_contiguous_window(intervals, 3, power_profile=[1000, 1000, 1000])
+
+        assert result_no_profile is not None
+        assert result_uniform is not None
+        assert result_no_profile["intervals"][0]["startsAt"] == result_uniform["intervals"][0]["startsAt"]
+
+    def test_profile_reverse_most_expensive(self) -> None:
+        """Profile-weighted most-expensive selection places high-watt phases on peak prices."""
+        # Prices: [5, 10, 20, 10, 5]
+        # Profile [3000, 500]: front-load is 6× heavier
+        #   Window 0: 5*3000+10*500 = 20000
+        #   Window 1: 10*3000+20*500 = 40000
+        #   Window 2: 20*3000+10*500 = 65000  ← most expensive weighted
+        #   Window 3: 10*3000+ 5*500 = 32500
+        prices = [5.0, 10.0, 20.0, 10.0, 5.0]
+        intervals = _make_intervals(prices)
+
+        result = find_cheapest_contiguous_window(intervals, 2, reverse=True, power_profile=[3000, 500])
+        assert result is not None
+        assert result["intervals"][0]["total"] == 20.0  # window starts at index 2
+
+    def test_profile_longer_than_duration_uses_first_n(self) -> None:
+        """A profile longer than duration only uses the first duration_intervals values."""
+        # Profile [3000, 500, 500, 999, 999] — only first 3 used for a 3-interval window
+        # Should be identical to profile [3000, 500, 500]
+        prices = [10.0, 10.0, 5.0, 5.0, 10.0]
+        intervals = _make_intervals(prices)
+
+        result_exact = find_cheapest_contiguous_window(intervals, 3, power_profile=[3000, 500, 500])
+        result_longer = find_cheapest_contiguous_window(intervals, 3, power_profile=[3000, 500, 500, 9999, 9999])
+
+        assert result_exact is not None
+        assert result_longer is not None
+        assert result_exact["intervals"][0]["startsAt"] == result_longer["intervals"][0]["startsAt"]
+
+    def test_profile_gap_still_prevents_spanning(self) -> None:
+        """Profile weighting does not override the temporal-gap check."""
+        # Very cheap interval at index 2 is separated by a gap — cannot be included
+        intervals = _make_intervals([10.0, 10.0, 1.0, 10.0], gap_after={1})
+        # Only two contiguous segments of 2 intervals each; 3-interval window impossible
+        assert find_cheapest_contiguous_window(intervals, 3, power_profile=[3000, 500, 500]) is None
+
 
 # =============================================================================
 # find_cheapest_n_intervals
@@ -280,6 +361,11 @@ class TestFindCheapestNIntervals:
         assert result is not None
         assert len(result["intervals"]) == 3
 
+    def test_min_segment_impossible_returns_none(self) -> None:
+        """Return None instead of partial results when min segment cannot be met."""
+        intervals = _make_intervals([1.0, 2.0, 3.0, 4.0], gap_after={0, 1, 2})
+        assert find_cheapest_n_intervals(intervals, 2, min_segment_intervals=2) is None
+
 
 # =============================================================================
 # group_intervals_into_segments

tests/test_relaxation.py

@@ -0,0 +1,86 @@
+"""Focused regression tests for relaxation phase sequencing."""
+
+from __future__ import annotations
+
+from datetime import timedelta
+from unittest.mock import Mock
+
+import pytest
+
+from custom_components.tibber_prices.coordinator.period_handlers import core as core_module
+from custom_components.tibber_prices.coordinator.period_handlers.relaxation import relax_all_prices
+from custom_components.tibber_prices.coordinator.period_handlers.types import TibberPricesPeriodConfig
+from custom_components.tibber_prices.coordinator.time_service import TibberPricesTimeService
+from homeassistant.util import dt as dt_util
+
+
+def _create_interval(base_time, offset: int, price: float, level: str) -> dict:
+    """Create one quarter-hour interval for relaxation tests."""
+    return {
+        "startsAt": base_time + timedelta(minutes=offset * 15),
+        "total": price,
+        "level": level,
+    }
+
+
+@pytest.mark.unit
+@pytest.mark.freeze_time("2025-11-22 12:00:00+01:00")
+def test_relaxation_preserves_level_filter_before_trying_any(monkeypatch: pytest.MonkeyPatch) -> None:
+    """Relaxation should try flex-only phases before dropping the configured level filter."""
+    base_time = dt_util.parse_datetime("2025-11-22T12:00:00+01:00")
+    assert base_time is not None
+
+    mock_coordinator = Mock()
+    mock_coordinator.config_entry = Mock()
+    time_service = TibberPricesTimeService(mock_coordinator)
+    time_service.now = Mock(return_value=base_time)
+
+    all_prices = [
+        _create_interval(base_time, 0, 0.18, "CHEAP"),
+        _create_interval(base_time, 1, 0.19, "CHEAP"),
+        _create_interval(base_time, 2, 0.22, "NORMAL"),
+        _create_interval(base_time, 3, 0.31, "EXPENSIVE"),
+    ]
+    config = TibberPricesPeriodConfig(
+        reverse_sort=False,
+        flex=0.15,
+        min_distance_from_avg=5.0,
+        min_period_length=60,
+        level_filter="cheap",
+        gap_count=1,
+    )
+
+    calculate_periods_calls: list[tuple[float, str | None]] = []
+    callback_args: list[str | None] = []
+
+    def fake_calculate_periods(
+        _all_prices: list[dict],
+        *,
+        config: TibberPricesPeriodConfig,
+        time: TibberPricesTimeService,
+        day_patterns_by_date: dict | None = None,
+        time_range=None,
+    ) -> dict:
+        calculate_periods_calls.append((round(config.flex, 2), config.level_filter))
+        return {"periods": [], "metadata": {}, "reference_data": {}}
+
+    monkeypatch.setattr(core_module, "calculate_periods", fake_calculate_periods)
+
+    relax_all_prices(
+        all_prices=all_prices,
+        config=config,
+        min_periods=2,
+        max_relaxation_attempts=2,
+        should_show_callback=lambda level_override: callback_args.append(level_override) or True,
+        baseline_periods=[],
+        time=time_service,
+        config_entry=mock_coordinator.config_entry,
+    )
+
+    assert callback_args == [None, "any", None, "any"]
+    assert calculate_periods_calls == [
+        (0.18, "cheap"),
+        (0.18, "any"),
+        (0.21, "cheap"),
+        (0.21, "any"),
+    ]

tests/test_tomorrow_data_refresh.py

@@ -40,6 +40,28 @@ def create_price_intervals(day_offset: int = 0) -> list[dict]:
     return intervals
 
 
+def create_level_gap_intervals() -> list[dict]:
+    """Create a small interval sequence where level smoothing changes the display level."""
+    base_time = dt_util.now().replace(hour=12, minute=0, second=0, microsecond=0)
+    levels = ["CHEAP", "CHEAP", "CHEAP", "NORMAL", "CHEAP", "CHEAP"]
+    totals = [0.10, 0.101, 0.102, 0.18, 0.103, 0.104]
+
+    intervals: list[dict] = []
+    for index, (level, total) in enumerate(zip(levels, totals, strict=True)):
+        interval_time = base_time + timedelta(minutes=index * 15)
+        intervals.append(
+            {
+                "startsAt": interval_time,
+                "total": total,
+                "energy": round(total - 0.02, 4),
+                "tax": 0.02,
+                "level": level,
+            }
+        )
+
+    return intervals
+
+
 @pytest.mark.unit
 def test_transformation_cache_invalidation_on_new_timestamp() -> None:
     """
@@ -222,3 +244,46 @@ def test_cache_preserved_when_neither_timestamp_nor_config_changed() -> None:
 
     # Verify period calculation was only called ONCE (during first transform)
     assert mock_period_calc.calculate_periods_for_price_info.call_count == 1
+
+
+@pytest.mark.unit
+def test_transform_data_uses_raw_levels_for_period_calculation() -> None:
+    """Period calculation must see raw Tibber levels even when priceInfo is smoothed."""
+    config_entry = Mock()
+    config_entry.entry_id = "test_entry"
+    config_entry.data = {"home_id": "home_123"}
+    config_entry.options = {
+        "price_level_gap_tolerance": 1,
+        "price_rating_gap_tolerance": 0,
+    }
+
+    time_service = TibberPricesTimeService()
+    current_time = datetime(2025, 11, 22, 13, 15, 0, tzinfo=ZoneInfo("Europe/Oslo"))
+    captured_levels: list[str] = []
+
+    def _capture_period_levels(price_info: list[dict], _day_patterns: dict | None = None) -> dict[str, list]:
+        captured_levels.extend(interval["level"] for interval in price_info)
+        assert all("_original_level" not in interval for interval in price_info)
+        return {"best_price": [], "peak_price": []}
+
+    transformer = TibberPricesDataTransformer(
+        config_entry=config_entry,
+        log_prefix="[Test]",
+        calculate_periods_fn=_capture_period_levels,
+        time=time_service,
+    )
+
+    result = transformer.transform_data(
+        {
+            "timestamp": current_time,
+            "home_id": "home_123",
+            "price_info": create_level_gap_intervals(),
+            "currency": "EUR",
+        }
+    )
+
+    smoothed_levels = [interval["level"] for interval in result["priceInfo"]]
+
+    assert smoothed_levels == ["CHEAP", "CHEAP", "CHEAP", "CHEAP", "CHEAP", "CHEAP"]
+    assert captured_levels == ["CHEAP", "CHEAP", "CHEAP", "NORMAL", "CHEAP", "CHEAP"]
+    assert all("_original_level" not in interval for interval in result["priceInfo"])