Add debug service to clear tomorrow data from interval pool, enabling
testing of tomorrow data refresh cycle without waiting for next day.
Service available only in DevContainer (TIBBER_PRICES_DEV=1 env var).
Removes intervals from both Pool index and coordinator.data["priceInfo"]
so sensors properly show "unknown" state.
Changes:
- Add debug_clear_tomorrow.py service handler
- Register conditionally based on TIBBER_PRICES_DEV env var
- Add service schema and translations
- Set TIBBER_PRICES_DEV=1 in devcontainer.json
Usage: Developer Tools → Services → tibber_prices.debug_clear_tomorrow
Impact: Enables rapid testing of tomorrow data refresh cycle during
development without waiting or restarting HA.
Changed from fixed padding (0.5ct below min, 1ct above max) to
proportional padding based on data range (8% below, 15% above).
This ensures consistent visual "airiness" across all price ranges,
whether prices are at 30ct or 150ct. Both subunit (ct/øre) and
base currency (€/kr) now use the same proportional logic.
Previous fixed padding looked too tight on charts with large price
ranges (e.g., 0.6€-1.5€) compared to charts with small ranges
(e.g., 28-35ct).
Impact: Chart metadata sensor provides better-scaled yaxis_min/yaxis_max
values for all chart cards, making price visualizations more readable
with appropriate whitespace around data regardless of price range.
Problem: In segmented price charts with connect_segments=true, vertical lines
at price level transitions were always drawn by the ending segment. This meant
a price INCREASE showed a cheap-colored line going UP, and a price DECREASE
showed an expensive-colored line going DOWN - counterintuitive for users.
Solution: Implement directional bridge-point logic using price level hierarchy:
- Add _is_transition_to_more_expensive() helper using PRICE_LEVEL_MAPPING and
PRICE_RATING_MAPPING to determine transition direction
- Price INCREASE (cheap → expensive): The MORE EXPENSIVE segment draws the
vertical line UP via new start-bridge logic (end-bridge at segment start)
- Price DECREASE (expensive → cheap): The MORE EXPENSIVE segment draws the
vertical line DOWN via existing end-bridge logic (bridge at segment end)
Technical changes:
- Track prev_value and prev_price for segment start detection
- Add end-bridge points at segment starts for upward transitions
- Replace unconditional bridge points with directional hold/bridge logic
- Hold points extend segment horizontally when next segment handles transition
Impact: Vertical transition lines now consistently use the color of the more
expensive price level, making price movements more visually intuitive.
Problem: When using dual y-axes (price + hidden highlight for best-price overlay),
ApexCharts calculates tick intervals independently for each axis. This caused
misaligned horizontal grid lines - the grid follows the first y-axis ticks,
but if the hidden highlight axis had different tick calculations, visual
inconsistencies appeared (especially visible without best-price highlight).
Solution:
- Set tickAmount: 4 on BOTH y-axes to force identical tick intervals
- Add forceNiceScale: true to ensure rounded tick values despite fixed min/max
- Add showAlways: true to price axis in template modes to prevent axis
disappearing when toggling series via legend
Also add tooltip.shared: true to combine tooltips from all series at the
same x-value into a single tooltip, reducing visual clutter at data points.
Impact: Grid lines now align consistently regardless of which series are
visible. Y-axis remains stable when toggling series in legend.
Changed from iterating over each day separately to collecting all
intervals for selected days into one continuous list before processing.
Changes:
- Collect all intervals via get_intervals_for_day_offsets() with all
day_offsets at once
- Remove outer `for day in days:` loop around interval processing
- Build date->day_key mapping during average calculation for lookup
- Add _get_day_key_for_interval() helper for average_field assignment
- Simplify midnight handling: only extend at END of entire selection
- Remove complex "next day lookup" logic at midnight boundaries
The segment boundary handling (bridge points, NULL insertion) now works
automatically across midnight since intervals are processed as one list.
Impact: Fixes bridge point rendering at midnight when rating levels
change between days. Simplifies code structure by removing ~60 lines
of per-day midnight-specific logic.
Fixes configuration wizard not saving settings (#59):
Root cause was twofold:
1. Linear multi-step flow pattern didn't properly persist changes between steps
2. Best/peak price settings used nested sections format - values were saved
in sections (period_settings, flexibility_settings, etc.) but read from
flat structure, causing configured values to be ignored on subsequent runs
Solution:
- Replaced linear step-through flow with menu-based navigation system
- Each configuration area now has dedicated "Save & Back" buttons
- Removed nested sections from all steps except best/peak price (where they
provide better UX for grouping related settings)
- Fixed best/peak price steps to correctly extract values from sections:
period_settings, flexibility_settings, relaxation_and_target_periods
- Added reset-to-defaults functionality with confirmation dialog
UI/UX improvements:
- Menu structure: General Settings, Currency Display, Price Rating Thresholds,
Volatility, Best Price Period, Peak Price Period, Price Trend,
Chart Data Export, Reset to Defaults, Back
- Removed confusing step progress indicators ("{step_num} / {total_steps}")
- Changed all submit buttons from "Continue →" to "↩ Save & Back"
- Clear grouping of settings by functional area
Translation updates (nl.json + sv.json):
- Refined volatility threshold descriptions with CV formula explanations
- Clarified price trend thresholds (compares current vs. future N-hour average,
not "per hour increase")
- Standardized terminology (e.g., "entry" → "item", compound word consistency)
- Consistently formatted all sensor names and descriptions
- Added new data lifecycle status sensor names
Technical changes:
- Options flow refactored from linear to menu pattern with menu_options dict
- New reset_to_defaults step with confirmation and abort handlers
- Section extraction logic in best_price/peak_price steps now correctly reads
from nested structure (period_settings.*, flexibility_settings.*, etc.)
- Removed sections from general_settings, display_settings, volatility, etc.
(simpler flat structure via menu navigation)
Impact: Configuration wizard now reliably saves all settings. Users can
navigate between setting areas without restarting the flow. Reset function
enables quick recovery when experimenting with thresholds. Previously
configured best/peak price settings are now correctly applied.
Implementation flaw discovered: gradient_stop calculated as
`(avg - min) / (max - min)` for combined data produces one value
applied to ALL series. Each series (VERY_CHEAP, NORMAL, VERY_EXPENSIVE)
has different min/max ranges, so the same gradient stop position
represents a different absolute price in each series.
Example failure case:
- VERY_CHEAP: 10-20 ct → 50% at 15 ct (below overall avg!)
- VERY_EXPENSIVE: 40-50 ct → 50% at 45 ct (above overall avg!)
Conclusion: Gradient shows middle of each series range, not average
price position.
Solution: Fixed 50% gradient purely for visual appeal. Semantic
information provided by:
- Series colors (CHEAP/NORMAL/EXPENSIVE)
- Grid lines (implicitly show average)
- Dynamic Y-axis bounds (optimal scaling via chart_metadata sensor)
Changes:
- sensor/chart_metadata.py: Remove gradient_stop extraction
- services/get_apexcharts_yaml.py: Fixed gradient at [50, 100]
- custom_translations/*.json: Remove gradient_stop references
Impact: Honest visualization with no false semantic signals. Feature
was never released, clean removal without migration.
Implemented new chart_metadata diagnostic sensor that provides essential
chart configuration values (yaxis_min, yaxis_max, gradient_stop) as
attributes, enabling dynamic chart configuration without requiring
async service calls in templates.
Sensor implementation:
- New chart_metadata.py module with metadata-only service calls
- Automatically calls get_chartdata with metadata="only" parameter
- Refreshes on coordinator updates (new price data or user data)
- State values: "pending", "ready", "error"
- Enabled by default (critical for chart features)
ApexCharts YAML generator integration:
- Checks for chart_metadata sensor availability before generation
- Uses template variables to read sensor attributes dynamically
- Fallback to fixed values (gradient_stop=50%) if sensor unavailable
- Creates separate notifications for two independent issues:
1. Chart metadata sensor disabled (reduced functionality warning)
2. Required custom cards missing (YAML won't work warning)
- Both notifications explain YAML generation context and provide
complete fix instructions with regeneration requirement
Configuration:
- Supports configuration.yaml: tibber_prices.chart_metadata_config
- Optional parameters: day, minor_currency, resolution
- Defaults to minor_currency=True for ApexCharts compatibility
Translation additions:
- Entity name and state translations (all 5 languages)
- Notification messages for sensor unavailable and missing cards
- best_price_period_name for tooltip formatter
Binary sensor improvements:
- tomorrow_data_available now enabled by default (critical for automations)
- data_lifecycle_status now enabled by default (critical for debugging)
Impact: Users get dynamic chart configuration with optimized Y-axis scaling
and gradient positioning without manual calculations. ApexCharts YAML
generation now provides clear, actionable notifications when issues occur,
ensuring users understand why functionality is limited and how to fix it.
Implemented comprehensive metadata calculation for chart data export service
with automatic Y-axis scaling and gradient positioning based on actual price
statistics.
Changes:
- Added 'metadata' parameter to get_chartdata service (include/only/none)
- Implemented _calculate_metadata() with per-day price statistics
* min/max/avg/median prices
* avg_position and median_position (0-1 scale for gradient stops)
* yaxis_suggested bounds (floor(min)-1, ceil(max)+1)
* time_range with day boundaries
* currency info with symbol and unit
- Integrated metadata into rolling_window modes via config-template-card
* Pre-calculated yaxis bounds (no async issues in templates)
* Dynamic gradient stops based on avg_position
* Server-side calculation ensures consistency
Visual refinements:
- Best price overlay opacity reduced to 0.05 (ultra-subtle green hint)
- Stroke width increased to 1.5 for better visibility
- Gradient opacity adjusted to 0.45 with "light" shade
- Marker configuration: size 0, hover size 2, strokeWidth 1
- Header display: Only show LOW/HIGH rating_levels (min/max prices)
* Conditional logic excludes NORMAL and level types
* Entity state shows meaningful extrema values
- NOW marker label removed for rolling_window_autozoom mode
* Static position at 120min lookback makes label misleading
Code cleanup:
- Removed redundant all_series_config (server-side data formatting)
- Currency names capitalized (Cents, Øre, Öre, Pence)
Translation updates:
- Added metadata selector translations (de, en, nb, nl, sv)
- Added metadata field description in services
- Synchronized all language files
Impact: Users get dynamic Y-axis scaling based on actual price data,
eliminating manual configuration. Rolling window charts automatically
adjust axis bounds and gradient positioning. Header shows only
meaningful extreme values (daily min/max). All data transformation
happens server-side for optimal performance and consistency.
Added two new rolling window options for get_apexcharts_yaml service to provide
flexible dynamic chart visualization:
- rolling_window: Fixed 48h window that automatically shifts between
yesterday+today and today+tomorrow based on data availability
- rolling_window_autozoom: Same as rolling_window but with progressive zoom-in
(2h lookback + remaining time until midnight, updates every 15min)
Implementation changes:
- Updated service schema validation to accept new day options
- Added entity mapping patterns for both rolling modes
- Implemented minute-based graph_span calculation with quarter-hour alignment
- Added config-template-card integration for dynamic span updates
- Used current_interval_price sensor as 15-minute update trigger
- Unified data loading: both rolling modes omit day parameter for dynamic selection
- Applied ternary operator pattern for cleaner day_param logic
- Made grid lines more subtle (borderColor #f5f5f5, strokeDashArray 0)
Translation updates:
- Added selector options in all 5 languages (de, en, nb, nl, sv)
- Updated field descriptions to include default behavior and new options
- Documented that rolling window is default when day parameter omitted
Documentation updates:
- Updated user docs (actions.md, automation-examples.md) with new options
- Added detailed explanation of day parameter options
- Included examples for both rolling_window and rolling_window_autozoom modes
Impact: Users can now create auto-adapting ApexCharts that show 48h rolling
windows with optional progressive zoom throughout the day. Requires
config-template-card for dynamic behavior.
Period data in array_of_arrays format now generates proper segment structure
for stepline charts. Each period produces 2-3 data points depending on
insert_nulls parameter:
1. Start time with price (begin period)
2. End time with price (hold price level)
3. End time with NULL (terminate segment, only if insert_nulls='segments'/'all')
This enables ApexCharts to correctly display periods as continuous blocks with
clean gaps between them. Previously only start point was generated, causing
periods to render as single points instead of continuous segments.
Changes:
- formatters.py: Updated get_period_data() to generate 2-3 points per period
- formatters.py: Added insert_nulls parameter to control NULL termination
- get_chartdata.py: Pass insert_nulls parameter to get_period_data()
- get_apexcharts_yaml.py: Set insert_nulls='segments' for period overlay
- get_apexcharts_yaml.py: Preserve NULL values in data_generator mapping
- get_apexcharts_yaml.py: Store original price for potential tooltip access
- tests: Added comprehensive period data format tests
Impact: Best price and peak price period overlays now display correctly as
continuous blocks with proper segment separation in ApexCharts cards.
Add dynamic rolling window mode to get_chartdata and get_apexcharts_yaml
services that automatically adapts to data availability.
When 'day' parameter is omitted, services return 48-hour window:
- With tomorrow data (after ~13:00): today + tomorrow
- Without tomorrow data: yesterday + today
Changes:
- Implement rolling window logic in get_chartdata using has_tomorrow_data()
- Generate config-template-card wrapper in get_apexcharts_yaml for dynamic
ApexCharts span.offset based on tomorrow_data_available binary sensor
- Update service descriptions in services.yaml
- Add rolling window descriptions to all translations (de, en, nb, nl, sv)
- Document rolling window mode in docs/user/services.md
- Add ApexCharts examples with prerequisites in docs/user/automation-examples.md
BREAKING CHANGE: get_apexcharts_yaml rolling window mode requires
config-template-card in addition to apexcharts-card for dynamic offset
calculation.
Impact: Users can create auto-adapting 48h price charts without manual day
selection. Fixed day views (day: today/yesterday/tomorrow) still work with
apexcharts-card only.
Simplifies the connect_segments implementation to use a unified bridge-point
approach for all price transitions (up/down/same). Previously used
direction-dependent logic (hold vs connect points) which was unnecessarily
complex.
Changes:
- get_chartdata.py: Bridge points now always use next interval's price at
boundary timestamp, creating smooth visual connection between segments
- get_chartdata.py: Trailing NULL removal now conditional on insert_nulls mode
('segments' removes for header fix, 'all' preserves intentional gaps)
- get_apexcharts_yaml.py: Enable connect_segments by default, activate
show_states for header min/max display
- get_apexcharts_yaml.py: Remove extrema series (not compatible with
data_generator approach - ApexCharts requires entity time-series data)
- tests: Move test_connect_segments.py to tests/services/ to mirror source
structure
Impact: ApexCharts cards now show clean visual connections between price level
segments with proper header statistics display. Trailing NULLs no longer cause
"N/A" in headers for filtered data. Test organization improved for
maintainability.
Renamed service modules for consistency with service identifiers:
- apexcharts.py → get_apexcharts_yaml.py
- chartdata.py → get_chartdata.py
- Added: get_price.py (new service module)
Naming convention: Module names now match service names directly
(tibber_prices.get_apexcharts_yaml → get_apexcharts_yaml.py)
Impact: Improved code organization, easier to locate service implementations.
No functional changes.
Added new service for fetching historical/future price data:
- fetch_price_info_range: Query prices for arbitrary date ranges
- Supports start_time and end_time parameters
- Returns structured price data via service response
- Uses interval pool for efficient data retrieval
Service definition:
- services.yaml: Added fetch_price_info_range with date selectors
- services/__init__.py: Implemented handler with validation
- Response format: {"priceInfo": [...], "currency": "..."}
Schema updates:
- config_flow_handlers/schemas.py: Convert days slider to IntSelector
(was NumberSelector with float, caused "2.0 Tage" display issue)
Impact: Users can fetch price data for custom date ranges programmatically.
Config flow displays clean integer values for day offsets.
Changed from centralized main+subentry coordinator pattern to independent
coordinators per home. Each config entry now manages its own home data
with its own API client and access token.
Architecture changes:
- API Client: async_get_price_info() changed from home_ids: set[str] to home_id: str
* Removed GraphQL alias pattern (home0, home1, ...)
* Single-home query structure without aliasing
* Simplified response parsing (viewer.home instead of viewer.home0)
- Coordinator: Removed main/subentry distinction
* Deleted is_main_entry() and _has_existing_main_coordinator()
* Each coordinator fetches its own data independently
* Removed _find_main_coordinator() and _get_configured_home_ids()
* Simplified _async_update_data() - no subentry logic
* Added _home_id instance variable from config_entry.data
- __init__.py: New _get_access_token() helper
* Handles token retrieval for both parent and subentries
* Subentries find parent entry to get shared access token
* Creates single API client instance per coordinator
- Data structures: Flat single-home format
* Old: {"homes": {home_id: {"price_info": [...]}}}
* New: {"home_id": str, "price_info": [...], "currency": str}
* Attribute name: "periods" → "pricePeriods" (consistent with priceInfo)
- helpers.py: Removed get_configured_home_ids() (no longer needed)
* parse_all_timestamps() updated for single-home structure
Impact: Each home operates independently with its own lifecycle tracking,
caching, and period calculations. Simpler architecture, easier debugging,
better isolation between homes.
- Introduced `get_intervals_for_day_offsets` helper to streamline access to price intervals for yesterday, today, and tomorrow.
- Updated various components to replace direct access to `priceInfo` with the new helper, ensuring a flat structure for price intervals.
- Adjusted calculations and data processing methods to accommodate the new data structure.
- Enhanced documentation to reflect changes in caching strategy and data structure.
Introduce TimeService as single source of truth for all datetime operations,
replacing direct dt_util calls throughout the codebase. This establishes
consistent time context across update cycles and enables future time-travel
testing capability.
Core changes:
- NEW: coordinator/time_service.py with timezone-aware datetime API
- Coordinator now creates TimeService per update cycle, passes to calculators
- Timer callbacks (#2, #3) inject TimeService into entity update flow
- All sensor calculators receive TimeService via coordinator reference
- Attribute builders accept time parameter for timestamp calculations
Key patterns replaced:
- dt_util.now() → time.now() (single reference time per cycle)
- dt_util.parse_datetime() + as_local() → time.get_interval_time()
- Manual interval arithmetic → time.get_interval_offset_time()
- Manual day boundaries → time.get_day_boundaries()
- round_to_nearest_quarter_hour() → time.round_to_nearest_quarter()
Import cleanup:
- Removed dt_util imports from ~30 files (calculators, attributes, utils)
- Restricted dt_util to 3 modules: time_service.py (operations), api/client.py
(rate limiting), entity_utils/icons.py (cosmetic updates)
- datetime/timedelta only for TYPE_CHECKING (type hints) or duration arithmetic
Interval resolution abstraction:
- Removed hardcoded MINUTES_PER_INTERVAL constant from 10+ files
- New methods: time.minutes_to_intervals(), time.get_interval_duration()
- Supports future 60-minute resolution (legacy data) via TimeService config
Timezone correctness:
- API timestamps (startsAt) already localized by data transformation
- TimeService operations preserve HA user timezone throughout
- DST transitions handled via get_expected_intervals_for_day() (future use)
Timestamp ordering preserved:
- Attribute builders generate default timestamp (rounded quarter)
- Sensors override when needed (next interval, daily midnight, etc.)
- Platform ensures timestamp stays FIRST in attribute dict
Timer integration:
- Timer #2 (quarter-hour): Creates TimeService, calls _handle_time_sensitive_update(time)
- Timer #3 (30-second): Creates TimeService, calls _handle_minute_update(time)
- Consistent time reference for all entities in same update batch
Time-travel readiness:
- TimeService.with_reference_time() enables time injection (not yet used)
- All calculations use time.now() → easy to simulate past/future states
- Foundation for debugging period calculations with historical data
Impact: Eliminates timestamp drift within update cycles (previously 60+ independent
dt_util.now() calls could differ by milliseconds). Establishes architecture for
time-based testing and debugging features.
